My nearly four year old Cooler Master Nepton 280L

Posted Apr 13, 2019, 11:31 AM UTC

Posted Apr 13, 2019, 11:31 AM UTC
Friends with an i7 3930k and ASRock X79 Extreme4-M. Never noticed any heat-related issues and was hoping to use this on my new build until I saw this. There's a small dab of gunk on the CPU but the socket is still dry. I think I lucked out.
Its probably low, if not empty, on coolant/water. It's probably something that could be fixed and refilled but a lot of careful effort with no 100% guarantee.
That said i would totally try personally because well.... I like a challenge.
It's actually not too hard, but first you'd have to Remove all those bolts around the cold plate, clean it up really nice, change the seal then cut off the tubes and replace them with new ones. jpmodified on YouTube does this stuff a ton. Just be sure to use some sort of anti growth and corrosive agent.
That's just blue paint. It's all good, don't worry about it.
My corsair h70 is nearly hitting a decade old. Is this just luck or are some brands better that others ?
I just came to this sub to post an almost identical picture of my 4 year old h100i. I spent $1300 on CPU/RAM upgrades today at micro center only to find this shit under my cooler.
Ugh, my H100i has been in service for 3 years now. I guess I should do a little inspection.
Urgh I have a H100i as well thats 4 years old, guess I need to go check it, thanks for posting this.
Do you think it's the type of sealant they're using ? I know sometimes they change to an inferior product due to issue with toxicity.
I suspect the only leak is from what I assume are o-rings sealing where the water takes a 90 degree bend into the block/pump. I'm hoping it'll come out fine after replacing those o-rings and filling it back up.
uspect the only leak is from what I assume are o-rings sealing where the water takes a 90 degree bend into the block/pump. I'm hoping it'll come out fine after replacing those o-rings and filling it back up.
I would check with the CM forums 1st to see if there's a mod to do. What concerns me is how many screws they've put into the unit.
Check out this one for example
Boy that thing has seen some use. Might be time for a replacement?
It certainly won't be reused until I can tear it apart and inspect it. A friend of mine had an unused Corsair H115i that I'm using on the build that replaced this one. I'm hoping I can just change out some O-rings and be good to go.
TIL my undeserved skepticism of closed-loop coolers is apparently actually quite deserved. Yikes.
I had the same concerns but the couple of cheap 120mm CLCs I had before this one hadn't given me any trouble so I figured it would be okay. I would have preferred to go custom, but this was crammed into an mATX build (Xigmatek Aquila case) and there just wasn't space. Thankfully, everything was still running fine when it was decommissioned.
Explain?
The blue is supposed to stay on the inside. The coolant on this closed-loop cooler leaked out. Thankfully, it was a slow drip that dried up before it got too far down onto the processor.
Lmao damn probably burned up too
It's solid state RGB! Colors built into the metals! /S
Oh, you're being sarcastic? I would've never guessed...