RJ-11 cable and router

My parents have one AP router and no RJ-45 cables laid in the rooms (they only use wifi). For some reason however they have cable with RJ-11 connector in each room (I noticed they end close to the AP router).

I'm wondering if I could use RJ-11 -> RJ-45 connector to connect those RJ-11 cables with lan ports in the router and on the other end with PCs? Will this even work?

Thanks

Posted Apr 14, 2019, 5:55 PM UTC

17
jspurlin03•

Open the faceplates and look behind the RJ11 jacks. It may be the way their landline phones were wired; depending on the age of the house, there may be CAT5 cable run through the walls for landline phone use.

My first house was wired with CAT5 for phone, into RJ11 jacks on the wall; I always intended to repurpose it because it’d have saved me a lot of effort and running cable.

1
OtherTechnician•

EDIT - Completely replaced response

​

Somehow, I totally missed the actual question the first time around.

​

RJ11 cables will plug in to RJ45 jacks (if that's what is in place). The problem will be that RJ11 only uses 4 wires, while RJ45 uses 8.

1
rudekoffenris•

RJ11 isn't twisted pair either. I don't know how this would work at all.

1
-rebelleader-•

Never plug rj11/12 into an rj45 Jack.

0
689430944•

my ISP does this

1
-rebelleader-•

they are hacks then. Anyone with any self worth would take the time to do the job right.

0
stephendt•

It does work. Just keep in mind, it's not going to work super well. A 20m run in my house yields a max throughput of around 80mbps before things start to fall apart.

1