Tailgate light bar wiring help

I just purchased the 49" tailgate light bar from Rough Country. It comes with a 4 pin connector for running, brake, and turn signal lighting but I need to hard wire the reverse light. Anyone have any clue where the wire would be and what color it would be? I'm not the greatest with wiring but I have a buddy to help with soldering and wrapping the wire. Thanks in advance.

Posted Apr 17, 2019, 9:08 PM UTC

23
Quirion_a•

You can either tap into the purple wire in the 7 pin harness for the reverse light or just pull one of the tail lights and tap it into the actual reverse light.

2
Imadethis4things•

Get a Y-splitter for the 4-pin so you can still tow. With a 10mm socket, take your left taillight assembly out (tailgate down, two bolts, pop it off the retaining/locating pins) and disconnect the reverse bulb plug. Snip the (blue on my truck) wire that’s hot when the truck is in reverse and work your splice.

Take your spare tire lowering device guide tube off and align the light bar with the marks you made when you measured for center and cleaned the area. Stow all the extra wire behind the taillight with some zip ties, reinstall the light, tidy up your wiring for the hitch wires and you’re done.

2
danrip91OP•

Thank you guys. Sounds simple enough. I'll be sure to post pics when it's done.

1
[deleted]•

[removed]

1