r/NFA•
vZeppelin

The Bren 2s works now thanks to the DeadAir Wolverine

The Bren 2s works now thanks to the DeadAir Wolverine

Posted Apr 18, 2019, 9:13 PM UTC

22137
vZeppelinOP7xSUPP 9xSBR•

I thought I'd try one more thing with the Bren before I started drilling new holes. I threw my DA wolverine on here. I had to order a 1/2x28 thread insert and here we are. It seems to work fine as of now. A few mag dumps and zero issues. Where with my Micro 30 I was only getting 15 or so rounds between failures.

Once i can get new stock regulators to mess with I'll probably try to get it to run with my Saker 762 but for now the wolverine will be fine.

It really makes me appreciate the Wolverine honestly. It's the only can that works with my Galil Ace and now this. Way to go Dead air

18
SykoFreak•

It's really disappointing to hear that CZ didn't put a proper suppressed setting on the Bren 2s. I was looking forward to this gun, but I won't be buying one now.

11
vZeppelinOP7xSUPP 9xSBR•

Just the norm. The 805 didnt have one and CZ seems to run the bren 2s suppressed in the normal mode. My other one even runs fine that way and a user on this forum runs his 9 inch 7.62 in the normal mode.

Factory guns are just generally shitty hosts. The scar17 has a suppressed setting too but you could still damage the gun without tuning it. Just to many variables for a one size fits all approach.

5
jay462Stamp This•

So true. Being a silencer nerd, my main requirement for a gun is how good a silencer host it will make. It's sad, but it's the way it is. I'm ruined.

I appreciate what Todd at Dead Air has done regarding backpressure management with a lot of their silencers. He's a good dude.

I will say that the Rugged Radiant has less backpressure than my Surge in its short configuration, even though they are the same size. There are several reasons for that, and I have a soon to be released YouTube video explaining it.

I wish silencers could be super quiet but also not add backpressure. I also wish I had 100 million dollars.

Keep fighting the good fight, silencer friend.

5
reshp2•

I appreciate what Todd at Dead Air has done regarding backpressure management with a lot of their silencers.

For real. I actually have the opposite problem with my Sandman K, it won't reliably cycle my ACR on the suppressor setting. Regular setting works ok, but there's noticeably higher recoil with the can. Hopefully the ACR breaks in a bit and starts running in the suppressor setting.

1
jimhiggerson•

What do you think are the best hosts in 556 and 762?

1
[deleted]•

[deleted]

1
southernbeaumont•

Few questions...

  1. Is that an AK mag, or does it only resemble one?

  2. Is that one of the 14 inch pistol versions?

  3. Is that really a 7.62x39 with a 1/2x28 thread?

5
vZeppelinOP7xSUPP 9xSBR•
  1. Not an AK mag
  2. 9 inch
  3. Yes
8
SCARSnARs•

I just want a bren 2...

5
vZeppelinOP7xSUPP 9xSBR•

They arent bad at all.

1
SCARSnARs•

Other than they cant be found

2
vZeppelinOP7xSUPP 9xSBR•

That's CZs fault for sure. They should have kept being in the gun in this configuration.

1

I live in California, big sads. Also how much did the rifle set you back? If you don't mind me asking

1
vZeppelinOP7xSUPP 9xSBR•

This is a pistol. So the gun cost like $1700-1750 I think. The acr tailhook set up on back was like $400.

3

I know she's a pistol now (after the stamp) but I was just talking about the base rifle

1
theburninator86•

So much want a bren 2 in 7.62x39 is at the top of my list. I was looking at mutants and other options this one seems way better.

2
sgaggie18•

Where did you get that brace option?

1
vZeppelinOP7xSUPP 9xSBR•

dan haga designs, still waiting on a form 1

2
Baneofbanes•

Dammit, onto the bucket list...

1
reshp2•

What was the problem, overgassed? Someone should buy a bunch of gas plugs and drill a suppressor setting port in the off position. They'd sell like hotcakes.

1
vZeppelinOP7xSUPP 9xSBR•

You cant get new ones yet unfortunately

1
Pomyluy∞×SUPP, ∞×SBR•

There are few black rifles more handsome than a CZ 806 with an ACR stock. How the ACR stock makes literally every rifle better looking, I dunno. It just does.

1
fbmbirdsSUPP x 4 SBR x 5•

I do not like the look of any brace besides the one on the honey badger pistol and now this gun. Bravo sir, slowly making me want a pistol brace now.

1
vZeppelinOP7xSUPP 9xSBR•

Personally I still hate the brace but this is a solid set up for it

3
fbmbirdsSUPP x 4 SBR x 5•

well either way, its one of the more natural looking ones.

1
everlasted•

What issue were you having? I have an 11" 5.56 one that I run exclusively with an Omega on it and I've never had an issue with it. It's gassy as hell though.

1
vZeppelinOP7xSUPP 9xSBR•

Over gassed causing jams

1
[deleted]•

[deleted]

1
vZeppelinOP7xSUPP 11xSBR•

No its not

1
Sup23unc•

How are you liking the acr tail hook adapter kit?

1
vZeppelinOP7xSUPP 11xSBR•

I dig it. He just came out with a metal version too

1
[deleted]•

[deleted]

1