r/VR6•
vwman18

Just doing a little maintenance today.

Just doing a little maintenance today.

Posted Apr 25, 2019, 10:34 PM UTC

146
ManintheMT•
2
vwman18OP•

I just can't get rid of it, it's too damn good of a driver. And that glorious exhaust note!

2
_Challenger•

Just did chains clutch and crackpipe on my 24v, lots of fun!

2
ReventonPro•

As someone with a 24V GLI, fuck that LOL

I know it's expensive to have done but I don't wanna do it!

2
vwman18OP•

Having now done it myself, I can say it's worse than it looks, but still a lot of work.

1
vwman18OP•

No chains needed, and hopefully never need to do that. This was enough work! It's had an oil leak at the valve cover forever, but I've been putting it off because, well, look at it! A few weeks ago the quick disconnect at the heater core inlet disintegrated. I took that as a sign to get to fixing. The list:

A/C compressor, evap valve, and drier. Aluminum Crack Pipe. T-stat, housing, and temp sensor. Every coolant hose is now new. Valve cover gasket. Couple new vacuum lines. Cleaned throttle body. Did my best to scrape off many years of oil leak crud. Changed trans fluid to Redline MT90. Polished headlights.

Hopefully I won't need to tear it down so far for quite some time, but it was worth the work.

2
MrVr68•

I was lazy or crafty. I just dangled the front end on a chair. Didnt disturb the ac system and only had to remove the lower coolant hose. To gain enough access to intake bolts.

1