Looking for help on what I could reuse from old build on a new one

So basically around 8 years ago i built my first pc, and around 4 years after that I bought a laptop because I didn't wanna build a new pc and also needed portabilty for school. Now I'm looking at building a new one and was wondering which parts I could reuse.

I had an i7 2600k with an amd 7970 which I'm assuming I would have to replace along with the motherboard. The parts that seem the most reusable to me in order would probably be the the case, psu which was a cooler master silent pro gold 1000w, an ssd which is a crucial m4 256gb, another 1tb hdd, and maybe the ram?

I'm assuming the ram is probably outdated as well because it was ddr3 1600mhz and I'm seeing now the common thing is ddr4 3000mhz. I'm also wondering how safe it could be to use an 8 year old psu as well. I don't really know how I would go about reformatting my drives to work on the new build so if anyone could point me in the right direction to that that would be greatly appreciated.

The new build would probably be a ryzen 2500/2600/2600x depending on if i can get a deal and how much performance benefit there is to picking the higher tier cpu, and probably a 1660ti because it seems like the best bang for the buck gpu out right now.

I wouldn't be pulling the trigger on the build until at least a month and a half from now or maybe 2 so if there's anything coming out that I don't know about or if the reasoning for picking a certain part sounds misguided I'm open to suggestion.

Posted May 9, 2019, 11:15 AM UTC

12
GallantGentleman•

8 year old PSU > would probably replace.

8 year old HDD > could potentially fail sooner than later. But why not.

You'll need to buy DDR4 ram, can't use DDR3.

The SSD can be reused.

3
uppermosteN•

I wouldn't be pulling the trigger on the build until at least a month and a half from now or maybe 2 so if there's anything coming out that I don't know about or if the reasoning for picking a certain part sounds misguided I'm open to suggestion.

Ryzen 3000 is coming out in exactly a month and a half - two months. Might want to check again then and post here if you are in need of help.

The parts you can reuse were well outlined by u/GallantGentleman

2