Did I get a good bin? I feel like I did, but I'm unsure.

So I'm currently rocking a 7600k running at 4.65ghz with 1.32-1.33 voltage (can't quite remember as it's been quite a while since I've played with it.) . With that I had a GTX 1060 6gb running at a Max of 2221mhz at 1.35-1.36. It normally stays around 2180-2190mhz. Would you consider this good for what they are?

Posted May 12, 2019, 7:01 PM UTC

25
BLUuuE839600k @ 5GHz | 570 @ 1400/8200 | 16GB @ 3600 CL14•

The average 7600k will do 5GHz at 1.35-1.40v, so you should be able to push a bit more.

I highly doubt your 1060 is running at 1.35v. The max you can run is 1.093v but good luck trying to do that without hitting the power limit.

3
Adaptable42OP•

Oops, I left out a zero. It was 1.035. and I would try to push my CPU farther, but I'm only using a 120mm aio from evga and now that I have a 1080 there's quite a lot of heat coming from my Corsair air 240. This summer I plan to get a 9600k and have tons of fun with that and hopefully having more headroom to OC my 1080

2
ossikaka•

Is the 1060 stable during fire strike at these clock speeds? Which pcb/model is it?

1
Adaptable42OP•

I don't use fire strike. I've used blender, heaven, oh God i can't remember the name but a lot of people call it the fuzzy donut, several of the games I frequently play, and I can't remember the last 2 resources I was using to test the OC. But yeah, it was stable. There might've been 1 issue with it at one point, but I can't remember if it was due to the 2221 OC or if it was me being dumb and pushing it,o or the memory higher.

It's a zotac card, dual fan model. Can't remember the exact name.

1
ossikaka•

Heaven is more a cpu than a gpu Test, cause it’s very light gpu load. And furmark is a power virus which more Tests the power delivery than the 3D capabilities of you’re Card.

If it would be stable during firestrike at these clocks it would be pretty amazing.

So it should be the zotac amp edition ;)

2