MF68 conversion to ISO?

Hello,

​

I have an ANSI Magicforce 68 (the non-backlight one) and I was wondering if I could just buy an ISO keyset and configure my OS to use the UK keymap. Do you foresee any issues with that approach? I have no problem staying with ANSI, but I would prefer ISO.

​

And as a related question, do you know any good keysets for the Magicforce 68? Specially if they have the second layer printed as well (e.g. the colon key's second layer is the Home button).

​

Thanks!

Posted May 15, 2019, 11:39 AM UTC

43
The_Gout•

How do you mean? Do you want to change the keycaps or the actual physical layout of the board?

You can easily set keyboard language to "UK English" in the OS and your "/@ and £/# will be the right way around, you could even buy keycaps that contain them and have a sort of hybrid ANSI - UK layout, you'd probably have to buy a complete keycap set that contains both ANSI and UK ISO though to do this.

In order to have full ISO though you would have to change the switch positions to account for the different enter and split left shift.

It's not impossible, but very difficult. It has been done. But even the guy that did it says they wouldn't recommend it.

I would recommend that you send back the 68 and get a natively ISO Magicforce 69. They are a bit more expensive than the 68 but will work out cheaper and a lot easier when you take keycaps into account, the keycaps are supposed to be pretty good quality Dye-subbed PBT too.

5
CloudNetworkingIOOP•

You can easily set keyboard language to "UK English" in the OS and your "/@ and £/# will be the right way around, you could even buy keycaps that contain them the right way around and have a sort of hybrid ANSI - UK layout.

​

That was exactly what I wanted to do. I'd like to change the keycaps anyway, so if I get UK keycaps that should pretty much get me what I wanted.

​

Apologies for the terminology confusion. I thought UK ISO only implied the UK-specific characters, but I see it also implies other changes!

​

I would recommend that you send back the 68 and get a natively ISO Magicforce 69. They are a bit more expensive than the 68 but will work out cheaper and a lot easier when you take keycaps into account, the keycaps are supposed to be pretty good quality Dye-subbed PBT too.

​

Thanks for the advice! it's about double the price. If the purpose of changing the keycaps was to just get the ISO/UK keymap I would definitely do what you recommend, however even with the 69 I would want to buy new keycaps :))))

I'll definitely consider the swap though, not sure how it'll go without backlight (I had backlit keyboards for a good while now), so if not having it becomes a problem I'll send the 68 back and get the 69.

​

Thank you!

1
The_Gout•

Best of luck!

2