r/Watches•
stoneeus

[Seiko Diver SKX007] A Tribute To My Dad

[Seiko Diver SKX007] A Tribute To My Dad

Posted May 31, 2019, 5:35 PM UTC

99588
stoneeusOP•

I literally just bought this watch today after mulling over it for a few months. What pulled the trigger was that on Monday my father passed away, happily in all honesty, but still leaving a hole in my heart. Just a day later, I read more anecdotal evidence that this model, the SKX007, would be retired despite its popularity and re-instated as a new line within the Seiko 5 family of watches. This glimpse at potential end-of-life status was the impetus to head out and grab it before its gone, as a tribute to my Dad. What else is the purest essence of a mechanical/automatic watch than to capture time? The poignant alignment of stars hit me in the feels.

This watch has 200m water resistance, ISO 6425 compliance, a 120-click unidirectional bezel sitting atop a 41mm stainless steel case with 22m lugs. I chose to go with the jubilee bracelet, despite possibly swapping it out for a nato soon. For now though, I love it, can't stop staring at it and watching it remind me that the only thing we can't earn in this life, is time.

102
jhay0824•

This is also the same watch that reminds me of my dad because he had owned quite a few and sadly the last one he had broke down on him and he hasn’t bought another since then. Was thinking of picking up one for him this father’s day. There is no other watch that will remind me of my dad than this one. Thank you for sharing your story. My condolences to you and your family.

20
stoneeusOP•

That's beautiful to hear. Thanks man

3
JusticeServd•

What's this "anecdotal evidence" that you read, any link? I'm thinking of pulling the trigger on a SKX007 but there are loads of other watches I want too...

7
8-f•

From what I understand, they make them in batches so they go in and out of production. Hence a "discontinuation scare" every time stock runs low.

5
stoneeusOP•

Well I read a couple of threads, one from Watchcuseek and another from a recent reddit post in this sub. I wasn't too sure about it cos of the death rumours but it looks like the replacements are going to be merged into the Seiko 5 range, have half the water resistance and a caseback, not sure if there's a crown guard but I think it's missing. My dealer told me hes getting another shipment in Monday then that's it, no more cos "they're not being made anymore". Pinch of salt I guess?

3
DiskKiller2•

Was it difficult to find a J model? I remember hunting my own for some time.

2
stoneeusOP•

Much easier to find in Asia :)

2
BigTrev1009•

First and foremost, my condolences brother. I'm extremely lucky to still have both of my parents but cannot imagine what you and your family are experiencing. Your story is a touching one as well, as it was my dad who got me into watches originally. Enjoy the new piece with honor and hopefully one day pass it down to your children (if you have any) to remember you by!

1
warm_sock•

I also just picked this up. It's beautiful. My only gripe is that mine loses about 15 seconds a day.

39
Camel_Crush•

You can always regulate it yourself with a select few amount of tools or have it regulated by someone. They're still terrific watches regardless

20
warm_sock•

I've thought about it, I just don't know if it's worth opening it up and playing with it.

11
Camel_Crush•

It is, however that being said, I remember when my SKX009 was my only watch and I didn't want to mess anything up. After opening that one up, I was able to get that and 3 other pieces well within acceptable accuracy. That being said, if you don't feel comfortable doing it, finding someone to help tune that accuracy could really make you like that piece much more.

14
CAElite•

Yeah I've been tempted to do mine, it's sitting at about 20seconds/day slow. Which is erring on the side of too much for my liking. No problems with build quality or alignment (although mine is a 013).

4
Camel_Crush•

The 013 is a great one! For me, I've opened up 4 watches (1 without hacking) and regulating w/o a timegrapher and keeping track with the WatchCheck app was easy enough, although having one would help do the job in seconds. All are now running + 1-7 seconds/day. At lower price points, sometimes being careful and taking a small risk can you make you appreciate that watch that much more.

4
CAElite•

Yeah, I'm tempted to ask my friends dad if he can help me out, not sure if he does any work on movements but I know he is a hobbist restorer of old watches so should at least know how to take the case back off and on without damaging the seal (I'm a part time lifeboat crewman, my SKX ends up in the sea more than most).

2
49x43x55•

Just picked up a 009, running about -2 seconds a day. Can't help but think I lucked out.

4
Rhansu•

Could be worse; mines running at -30s and both the dial and chapter ting are horribly misaligned. Enjoy it :)

3
ghost_dodo•

I'm running +30. Maybe we should combine watches

2
stoneeusOP•

I have a misaligned chapter ring...On my Tag Heuer Aquaracer. Drives me mad.

2
warm_sock•

Oof, pic of the watch? I'm curious.

2
Rhansu•

Unfortunately the camera on my old oneplus has decommissioned itself :/ but the dial is rotated about 1min/4-6° from the centerline. The chapter ring has faced a similar fate as it has come loose from its original position after a bikeride in the city. The watch has seen very little use, maybe 4 months of wrist time in a span of 2 years. I really don't know what to do with it. I contacted the reseller when I realized the dial was crooked but I was basically told that the issue isnt big enough.

2
babyivan•

Mine too, but if I keep it crown UP at night, it is almost dead on.

2
warm_sock•

Crown up as in the watch is sideways?

3
babyivan•

Yup. Crown straight up into the sky. Most my seiko movements catch up in this position.

2
warm_sock•

Interesting, I'll give that a shot.

2
stoneeusOP•

Will monitor this and see what I get!

2
Tigerbait2780•

Yeah that would bug me, mine runs about +3

2
SamS42•

You could regulate it, but then the diver’s ISO certification will be compromised

1
warm_sock•

Yeah, that's what I'm worried about since I do plan to dive with this watch.

1
Basic_Butterscotch•

15 seconds is pretty good for a 7s movement. Seiko's stated accuracy for the 7s26 movement is like +/- 45 seconds per day.

Cant really expect chronometer accuracy from such a cheap watch anyway.

0
8DDD•

Sorry to hear your father's passed. All the best to you and your family!

12
bauerracing•

I'm wearing one now with the rubber strap.

8
Pinkishplays•

Wearing my 009 on a Pepsi nato at work today

3
bauerracing•

Excellent

1
babyivan•

My pepsi is on the rubber, my 007 resides on the stock Jubilee.

1
bauerracing•

The Pepsi is high on my list but I'm probably going with a Hamilton Khaki next.

3
babyivan•

Excellent choice either way

2
bauerracing•

Thanks

2
jackmagger•

Beautiful story, OP. I hope your father is resting easy. Cheers to him!

7
stoneeusOP•

Cheers man. Know he's in a better place now

2
ycontrol1371•

Your bezzle is aligned, consider yourself blessed.

6
stoneeusOP•

Lol. Wait til you see my Aquaracer

1
Mittt7•

Epic backdrop!

5
stoneeusOP•

Reminds me of waves!

1
rudemood•

I love mine too

3
Harryisamazing•

Sorry to hear about your father's passing, that is a beautiful watch... may you wear it and enjoy it in good health!

3
RCJH_KU•

My condolences about your father. You picked up a fantastic watch to remember him by. Had the same watch on my wrist today. I always come back to it.

3
hEEbtheJEWish•

Does anyone have the baby monster or monster? I'm thinking about getting one and I'm wondering what people think.

2
AndroidIsAwesome•

I own 4 Seiko monsters. And 2 skx's. I can tell you that monsters are far better than baby monsters in terms of build quality and overall fit. My szsc005 and srp315 are two of my favorite watches ever. But good luck buying one for a good price because they're all well over $400. No matter what price you pay you'll like it though

2
babyivan•

Wearing my early gen2 monster (no crappy prospex logo) on an engineer bracelet as we speak. My all-time fave Seiko! If you dont mind paying a few bucks, you can find a nice one. Baby monster is ok, but not an iso.

1
CaptainBW•

Condolences to you and your family. May your father rest in peace. And great watch, have mine on a Barton black rubber strap at the moment.

2
stoneeusOP•

Would love to see a pic of that

1
CaptainBW•

I think it’s a great sporty combo, would totally recommend. I’ll try to figure out how to send a pic later today when I’m off mobile

1
theviper89•

SKXY

2
walrus120•

Hey I’m looking at one of these on the second hand market. May not be practical for me my cut off is 40mm I think this is 42 but anyone have an idea of a decent price used

2
ShowedUpLate•

SKX013 instead

3
walrus120•

Oh yeah what is it smaller case?

2
ShowedUpLate•

Yup =)

3
tavVproject89•

Is the SKX really discontinued? Link?

1
babyivan•

Yes, discontinued for about 4-6 months already. There's no official word from Seiko (they never announce things), but trust me it's true. Prices have started climbing as of late. They made so many of them that it's still not hard to find, but that won't last forever. Of course, there's plenty to be had in the secondhand market.

3
InternationalWeek•

holy shit thank god i got mine last year! i had no idea

2
ycontrol1371•

This is total bullshit, there is an SMX discontinuation rumor nearly every year.

1
babyivan•

Not sure of the SMX, pretty sure of the SKX. 😎

I believe there's a Seiko 5 that is it's 'kind of' replacement. I forget the model number. But the writing is on the wall; the fact that the latest seiko 5 models have a better movement is a says a lot.

3
Bison308•

Can I buy that bracelet for a seiko samurai?

1
stoneeusOP•

Not sure about that. It's a 22mm bracelet

1
[deleted]•

[deleted]

1
fedeb95•

Nice rug, it really ties the place together

1
beelzibubber•

I feel you. My father introduced me to loving seiko automatics.

Also, seeing the picture made me think you'd shot it with your new watch lying on my Dad's chest.

1
fathusky2341•

Can anyone tell me if sapphire can with stand a hard hit to a wall (I know hardlex can). Want to buy a watch and wear it in training.

1
stoneeusOP•

Sapphire is harder than hardlex, second to diamond iirc

1