2006 Cadillac CTS 3.6 , uneven brake ?
I recently replaced the brake caliper with a used one since mine was seized. After driving i noticed the brake pad seems to only be hitting half the disc. The brake pad(s) are brand new, so are the rotors. What could be causing this ?
Posted Jun 4, 2019, 5:13 PM UTC
14
Did you lube the pins and "ears" of the pads? Also is the used caliper good?
I did, could it be that the metal "clips" have to be replaced ?
I would take wheel off and make sure the pins aren't hitting the caliper. The pins usually have two flat spots and if they aren't in their spot that puts caliper on an angle. I also would take the hardware off and clean any rust that may be under them. Push the piston(s) in and make sure the new used caliper isn't bad as well.