Does skip show couriers a different map than customers see or something?

I place an order, get the map, it puts the pin pretty much right on my apartment and shows a nice pretty red line. And then about a quarter of the time, I get a driver who spend 15 minutes driving in circles (or driving right past the apartment), or instead of ending up at XXXX Whatever Road Apartment number YYY, calls from YYY Whatever road wondering why they're at a grocery store, and I'm left here going "but hoooooooow".

Is Skip's back end just that trash or is this just some less than clever drivers? Cause this is getting a bit ridiculous.

Posted Jun 18, 2019, 10:01 PM UTC · edited

125
LiterallyARedArrow•

To add to what's already been said, there's a couple places in my city that literally have the address as other places according to google. So it isn't too unlikely that I'll end up driving to the wrong house because google thinks house number 5607 is where 1203 is and have to call the customer

(which half the time is followed by a "this never happened before today", like what did you think I purposely drove 2 km away from your house just so your food would be late?)

3
half3clipseOP•

So wait, drivers are expected to use google maps or etc then, as opposed to skip handing you a route? Cause a few times I've had to suggest they use google maps (on the assumption that skip I showing them something stupid) after they call and they're like "Ok there it is!". Google can find the address just fine, which is why I was wondering if skip was doing it's own idiotic thing for GPS and making drivers use that.

How does skip parse the address then for you guys? Because when they end up at the wrong address, it's always the apartment number. Like if I give Skip 1234 Fake Street Apt 567, they'll end up at 567 Fake Street calling from the grocery stores parking lot. More often they just literally can't find the address. They don't end up at the wrong address they just drive circles all over the neighbourhood, occasionally driving right past building.

I guess if they're just deciding to not use google maps and are working off dead reckoning, that would at least explain some of it

2
LiterallyARedArrow•

drivers are expected to use google maps?

Yes, or any other map app that works.

As I said, Google doesn't always work. It becomes very apparent when you are using it 10-20 times a day. It will send to you the wrong house number but the same ave/street all the time. It will send you to the wrong part of the street claiming that's where the house is or even worse will just send you to a random part of town because it literally cannot find the address at all.

It is in no way a save all solution in my experience.

2
Mackenzie-S•

Uber uses built in nav, but Skip doesn't. It just does an external link to the courier's default nav app.

I believe Uber can be more accurate because they can direct you to exact coordinates, while Skip will just use Google Maps or whatever on their end to determine the nearest address to where you dropped the pin.

I notice this is an issue with apartment lots (the ones that have a building 1000, 2000, 3000, etc.) and condo villages that use unit numbers with one central main address. Even if you drop a pin on your exact building or condo, Skip will just find the nearest address, which means Google Maps will take the driver to the entrance of the parking lot or to a default building that may not be yours.

1
half3clipseOP•

Oh no I'm telling skip the address directly, not just dropping a pin on the map. It then drops the pin pretty much directly on me from the address information. Which is why I was wondering if they did some dumbfuckery like using the Google maps API to generate the map for me but had some custom hunk of junk for the drivers.

So either skip does something really dumb when parsing address to send to drivers, or...idk.

1
Mackenzie-S•

So either skip does something really dumb when parsing address to send to drivers

Skip is notoriously incompetent, so that is probably correct.

2
The_Forgotten_Fox•

To be fair, Apple Maps and Google Maps are notorious for having issues when you add unit numbers to addresses.

There have been so many instances of me being directed to the wrong place, all because a customer or a Skip CS Agent entered the unit number with the address. I can’t even count the number of times that I’ve told customers to edit their address in the app or on the website. My recommendation is: list the building address in the order, and state the Unit No. / Buzzer No. in the comment/message to driver.

For example, say you live at 654 - 321 Fake St., you’d drop the 654 from the address, so that when drivers accept the order and swipe the direction tab, it auto-fills Apple/Google Maps with 321 Fake St.

Adding that unit no. to the official address can lead to the map services using your unit number as the actual address, so it would think that your address is 654 Fake St. instead of 321 Fake St.

1
[deleted]•

I suggest to either write the apartment number before the street address, or not to write the apartment number in the address field and put it in the notes.

So, I would write the address as: 567-1234 Fake St.

Or, 1234 Fake St. And write the apartment number in notes.

Also, ask the driver what the address they have in the app and the map.

1
Joelredditsjoel•

My experience when this happens to me is that the Skip app sends the Google Maps app wrong information. When it’s happened, I manually enter the address in Google Maps and get the proper location.

1
LiterallyARedArrow•

I've tried that and gotten the same address, I usually have to look for it through Google's suggested list of addresses to find it, usually the second or third suggestion

1
BustinDieber8•

Many times customers have told me about dropping a pin on their location. The problem is you drop a pin and Skip translates that into an address written out in text form in our job order.

We never see a pin.

We go by this address even if Skip supercomputers say it’s an address that doesn’t exist.

One example is my customer dropped a pin at his work address 14630 Yellowhead Trail but Skip told me just “Highway 16 West” with no other directions.

After you drop your pin, do you see an address written out? Is it correct?

We get a ton of jobs where the customer has to type the actual address in the delivery instructions (scroll way down in the app to find this field - also make sure you don’t put delivery instructions into the restaurant instructions field) because they say the app won’t allow them to choose the actual correct address.

Hopefully this is helpful.

2
half3clipseOP•

I don't drop the pin, tell Skip the address directly as 1234 Fake Street Apartment 567 and it puts the pin right on top of me. So Skip can find my address (for me at least) just fine. Which is why i'm wondering if skip is doing some dumb custom stuff in the back end for drivers instead of using a google maps API or something.

They're also not ending up at some random wrong address, or needing to call to ask for the address. They either end up just driving in circles completely unable to find 1234 Fake Street, or they end up at 567 Fake Street

1
BustinDieber8•

Our courier app lets us choose an external app for mapping, either Apple, Google, or Waze as our default. If we tap the directions icon in the Skip courier app it ports the written out address to that app.

I’m guessing some drivers don’t bother tapping for directions or chose Apple Maps as their default. In which case they’re lucky to be in the right city 😖

1
MikeM336699•

I know in my town there’s an issue where it’ll send you to say xxxx 2nd Ave East instead of xxxx 2nd Ave West on google maps once every so many orders. But it’ll be the same people over and over so you have to learn over time which addresses this happens to. Another issue will be say sending you to say the 2500 block houses when the address is in the 1300 block houses. It’s something to do with google maps usually or the address in general and something you usually don’t catch until you’re actually at the wrong address

1
yyjdrivers•

Too bad Skip The Dishes doesn't utilise Plus Codes. This could solve a lot of problems. https://plus.codes/ or https://support.google.com/maps/answer/7047426?co=GENIE.Platform%3DAndroid&hl=en

1
SkipDriverCalgary•

Plus codes seem problematic as well. For instance, which house do you deliver to with this plus code?

https://i.imgur.com/qGL1isf.png

1
yyjdrivers•

It's still more accurate than many street addresses.

0
Joelredditsjoel•

I’m surprised with the amount of drivers commenting that don’t realize it’s not necessarily a problem with Google Maps, but a problem with how the Courier App sends information to the Google Maps app. Whenever I get to a location that doesn’t match up with the listed address, I just enter the address manually into Google Maps.

1
ChungNorris•

It could be worse. I live on a street calls Old Mill road and I've had 2 couriers drive to an actual old mill.

1
[deleted]•

[deleted]

1
yyjdrivers•

Is the transit fee accurate in cases like this? It seems to me that you guys might be getting screwed if the time/distance is different than what is expected.

1
[deleted]•

[deleted]

1
boogabuga•

Often times it glitches when loading the address and sends us to the wrong place entirely. I'm not sure where the issue comes from, we end up having to manually enter the address in and it will show up properly. It's very strange.

1
skipdashuber•

Oh no, this happened to me 4 times in the past week. I had to figure it myself because Google didn't have those addresses. 2302 street name would take me 3 kms away from 2304. Skip never compensated me, they just told me to "go to the right address please"

1
BabyTristanaMOD•

We have a different looking map then customers see and when we have an order we use whatever gps or app we want to navigate the route, we do not have to follow any predetermined route.

0