Published Circuit: Efficient Power Source x Battery - Auto Switch Circuit
If power generated dips below your load, it will cut to battery power and redirect the remaining power generated (that you now aren't using) into the battery, slowing the drain time on the battery considerably.
When you generate 4 power more than your actual max load, it will kick back to using generators, and any overflow generated will still be directed to the battery.
Low power consumption makes you less likely to having a need to use the battery. Giving you higher battery charge to last a while.
Higher power consumption makes it more efficient when you do cut over to battery power. Giving you slower battery drain and less need for a high charged battery.
This is assuming you are using a windmill for a consistent generation.
https://www.rustrician.io/?circuit=2086f2a5f3fce174419d552cd95136c7
(use the proof of concept layout in the bottom link, leaving this link intact tho)
Edit: Adding a ingame pic in case the link screws up again.
Edit: Made an Expanded version that will work with loads over 100 power. Also works when it cuts to batteries.
https://www.rustrician.io/?circuit=c0b7e274fd580c72ab5da59ebea97fd2
This one is running 4 SAM Sites for demonstration.
(The simulator breaks the circuit if you try to cut from batteries to generators.. It works fine ingame)
Here is a proof of concept. (slightly improved routing of power)
https://www.rustrician.io/?circuit=116cf3d2138081cddf045309a38aa106
Both Circuits have a 70 power demand
Both generate 65
Both batteries have a 2 minute charge.
Go to the cog wheel in the top left and change the speed to see how fast the common version depletes compared to the one I made.
The extra components and minor extra power consumption are well spent when you consider a battery could last twice and long.
Posted Jun 19, 2019, 10:40 PM UTC · edited