Screen freezes and locks up randomly

HELP

CPU: Intel i7-4790K (8) @ 4.00GHz

GPU: NVIDIA GeForce GTX 1080 Ti

RAM: 32 GB 1866 MHz DDR3

Motherboard:

Screens: 2560x1440, 1920x1080

Audio Codec: ALC1150

Ethernet Card: Intel GbE LAN chip (10/100/1000 Mbit)

​

Guide: Vanilla

​

Issue Part: Not a clue. Everything has been working fine for quite some time now until a few days ago when I decided to move computer to different part of the office. Not sure if there is some setting that got reset from power being disconnected from computer. The monitors simply freeze but if I have music playing I can still hear the audio, and there is no clear indication of when the freeze will occur and can happen immediately after reboot or an hour later when using any application.

​

Essentials List: https://drive.google.com/file/d/1o-79dGPuZuFY5083EyQ8YzC1IJHRZNNE/view?usp=sharing

Posted Jul 4, 2019, 11:49 PM UTC

18
GMSteuartOP•

Update: I am not completely certain about this, but I believe the issue came from the thunderbolt 2 drivers on the motherboard being unactivated after unplugging the pc during relocation. After going into windows and doing some typical maintenance stuff, I noticed that the thunderbolt 2 driver had an issue and I ran the suggested update. Decided to try macOS after on a whim, and voila, so far no crashes.

2
MinhThienDX•

Unbelievable, good job 👏

1
MinhThienDX•

I think your CMOS battery is dead

Try to change some BIOS settings and then disconnect your power to test that

And after some quick google, I see real Mac randomly freeze too 😂

1
GMSteuartOP•

Ya. My google fu has been zero help given how generic the problem is. I’ll check this out.

1
GMSteuartOP•

The thing is, all my BIOS settings are still saved from setup for the hackintosh. Would those still persist even if the CMOS battery is bad?

1
MinhThienDX•

Ah then that is not the case

Congrats, your hackintosh is so good it have legit mac's problem 😂

1
GMSteuartOP•

Hahahahaha. I wish. Something must have changed recently.

1
GMSteuartOP•

made a comment on top level of post thread with an update if you're curious what the issue MIGHT have been. :)

1