How can I get consistent fusion?
I'm on the road to becoming an Atmos powergamer, but I still can't get fusion down consistently. I have good trit production and solid heat exchange, but I always produce "dud" fusion cans with thousands of moles of co2, plasma, and trit that drop to 2.7 K after fusing for half a second. The other times I produce big cans that just stay at 20kK and claim to have fused but produce no product and stay at like 5~ reaction instability.
My usual setup is ~3000 moles total of 70/30 plasma/CO2 at about 150K, around 4000 kpa, that I then pump Tritium into until it's about 40% trit and 200K. Even heating to 30,000K usually ends up as a dud or a non-starter.
Does anyone have the fusion code to help out? Should I go smaller for a starter can? What does instability mean for a reaction? What products are produced at what instability? Should I change my ratios? I have a ton of questions that no one seems to be able to answer IC and the admins don't know either. CE is busy killing off people with electrified grilles and becoming radman, other Atmos is trying to plasmaflood, someone blew up medbay..... I just wanna do fusion
Posted Jul 18, 2019, 2:54 PM UTC
Edit: Oh, it's Niko again, ayyo. Yeah if you see Joey or Pluto IC, just ask and you know I'll help ya.
What server? (I could possibly help you IC)
But yah change your ratio up. Starting with 70/30 plasma/co2 then adding trit till 40% will get you about 42/12/40 plasma/co2/trit. You want plasma to be exactly (or real close to) 50% of your can. Try a 50/40/10 mix, after you get that to work, try increasing the tritium % and total mol count.
As long as you have a good ratio and 10,000+ temp, you should be getting a decent reaction.
As long as you can easily heat your mix to over 10,000 then no, you don't have too many mols. Though I like to prepare a 50,000 mol can, pump 1,000 mols to another can and heat that can up and let it react for a moment then use that can to jumpstart the 50,000 mol can.
It me, Reinhardt. You really are a lifesaver, I'll try that later tonight. I've seen 90/10 plasma co2 mixes run for high energy secondary fusion reactions, so I guess it's just an energy threshold.
Here's one of my 30k mol cans in "action'
Do you really not need that much tritium? I was running 33/33/33 canisters. It tended to 'non starter' to 2.7k a few times before it would actually kick off and reach millions of degrees. Using one of the previously fused cans as a starter I was able to get a second canister to e+019 today. 3k mol reaction the first can, 6k the second.
Performed some tests
Ratio 25% co2, 18% tritium, 57% plasma, 1291 total mol at starting temperature of 11,000 produced canister temperatures of 150,000 degrees. Temperature Delta: 139,000. Pathetic.
Ratio 21% co2, 28% tritium, 51% plasma, total 4000 mol at starting temperature of 25,000 kelvin produced canister temperatures of 1.1e+012 degrees. Massive increase in temperature, but weak for fusion. 1000 mols were lost during the fusion process. Added 8 zeroes.
Ratio 19% co2, 36% tritium, 45% plasma, total 3143 mol at starting temperature 3.8e+009 produced canister temperatures of 2.8e+018. Temperature delta of 2.8e+018. 1000 mols were lost during the fusion process. Dramatic increase in energy. Nine zeroes.
Ratio 22% co2, 26% tritium, 51% plasma, total 5235.9 mol at starting temperature 3.6e+017 produced canister temperatures of 2.09e+026. Added 9 zeroes.
Ratio 16% co2, 47% tritium, 35% plasma, total 3820 mol at starting temperature 4.8e+017 produced a canister temperatures of 4.3e+025. 8 zeroes.
Notes:
While one would assume that increased mols increases energy which increases heat, fusion by nature creates and destroys mols, making controlling the mol input tricky.
Almost all of the destroyed mols are tritium.
The temp increases suggest something fucky going on because the code doesn't seem to understand that the increase from e+017 to e+026 is several orders of magnitude more energy than e+09 to e+018... somehow.
The mix ratio doesn't seem to be that important. I'll test different gasses tomorrow.
I saw you ic doing some of your tests...
If you see Joey Bananas (human) or Plutonium CCXXXIX (plasmaman), that's me.
With incin heat alone I think I found a very solid starter with only 400 mol trit, me and Tritium V experimented and got e9 on a starter can consistent from 2000 mol 60/40 plas co2 and just 400 moles of added trit. Adding any more trit usually ended in duds, must be the heat.