Ender 3 + BL Touch = Mesh being generated but no print happening

My BL Touch seems to be working as expected, it's leveling

Send: M503
Recv:   G21    ; Units in mm (mm)
Recv:   M149 C ; Units in Celsius
Recv: 
Recv:   M200 D1.75
Recv:   M200 D0
Recv:   M92 X80.00 Y80.00 Z400.00 E93.00
Recv:   M203 X500.00 Y500.00 Z5.00 E25.00
Recv:   M201 X500.00 Y500.00 Z100.00 E5000.00
Recv:   M204 P500.00 R500.00 T500.00
Recv:   M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z0.30 E5.00
Recv:   M206 X0.00 Y0.00 Z0.00
Recv:   M420 S0 Z0.00
Recv:   G29 W I0 J0 Z0.14750
Recv:   G29 W I1 J0 Z0.19500
Recv:   G29 W I2 J0 Z0.29750
Recv:   G29 W I0 J1 Z0.10750
Recv:   G29 W I1 J1 Z-0.00250
Recv:   G29 W I2 J1 Z0.15000
Recv:   G29 W I0 J2 Z0.10250
Recv:   G29 W I1 J2 Z-0.02750
Recv:   G29 W I2 J2 Z0.09000
Recv:   M145 S0 H200 B60 F255
Recv:   M145 S1 H240 B0 F255
Recv:   M301 P21.73 I1.54 D76.55
Recv:   M851 Z-14.82
Recv:   M906 X800 Y800 Z800
Recv:   M906 T0 E800
Recv: 
Recv:   M569 S1 X Y Z
Recv:   M569 S1 T0 E

But when I run a print from Curia it homes, generates a mesh, and then the LCD displays "Stopped" and the printer stops moving, but octopi still shows that the print is printing.

I can post the GCode I've been trying to print if needed. All my axis seem to be working as expected, but nothing seems to be printing :(

Edit: This is the firmware config I'm using: https://github.com/jackmarketon/Marlin-bugfix-2.0.x-SKR-1.3/tree/master/Marlin