Advice for reducing power usage of home loan/file server

Help

Howdy,

I'm looking for ideas on how to reduce the power usage of my main server.

It's running a i7 2600k with 4 x 8GB DDR3 ram modules, an H310 HBA, 8x 10TB WD white drives and two terribad OCZ SSDs.

The current power draw is been 150 and 200 watts based on load and I want to see if I can get it much lower then that.

I currently run three or four vms with one of them being Plex, so transcoding is probably going to kick in at some point.

Any recommendations or an I pretty much stuck due to the drives causing most of the power draw?

Posted Aug 21, 2019, 3:26 PM UTC

17
theem3thod•

This reminds me of Apollo 13 where they only had so much power to work with and had to test what each component was using.

2
theem3thod•

This.

2
D2MoonUnitOP•

I'm getting that vibe too. :-)

1
rosspulliam•

Are your drives allowed to spin down when not in use? Are you using all of the memory? Can yank a couple sticks out. Can you consolidate the array to fewer drives and stick the extras in the drawer as cold standbys?

1
D2MoonUnitOP•

They aren't set to spin down currently. I'm not sure if that will play nice with luks and zfs though.

I'm running an 8 disk raidz2 array that is mostly for, so breaking it up would be a pain.

Same deal with the memory, I'm using most of it between zfs and the running vms.

1
raj_prakash•

Those spinning drives will use 5-10W depending on load so that's half your power usage right there. CPU and associated fans will account for at least for another 30W easily. You could get some Noctua fans for slightly lower power requirements and maybe a "T" 35W CPU and drop the capability of the CPU fan.

1
D2MoonUnitOP•

Thanks for the info. I've got a kill-a-watt somewhere so I might just disconnect the drives from power and see what the load looks like without them.

I've also been thinking of replacing the hardware with something from the naskiller v4 build list but I don't know if that will actually help reduce my power usage or not since I'm currently running a Sandy bridge cpu.

1