r/Delica•
UKtwo

Anyone have experience using longer struts to raise the lift gate more or will the roof interfere?

Anyone have experience using longer struts to raise the lift gate more or will the roof interfere?

Posted Aug 25, 2019, 3:16 PM UTC

812
ResoluteCaution•

Mine lifts all the way. Bad or wrong struts would be my guess. Part number on mine is mb337427.

6
UKtwoOP•

Thank you so much!! I'm like a block away from a major Delica repair shop right now so I'll check mine and then see if they have them in!

3
weedgaze•

Make sure you specify high roof. IDK which model the other guy's got but the model numbers will be different. If it's a competent Delica shop they'll ask you which roof style you have, but if you go in specifically asking for that model number they might not ask you.

2
UKtwoOP•

For sure. I'm traveling out of my Delica right now so I'll be rolling up to the shop in it.

1
telepoiss•

Did you already try the swapping L/R and mounting upside down trick?

http://delicaforum.com/index.php?threads/rear-hatch-easy-mod-no-more-hitting-your-head.62/

6
UKtwoOP•

I haven't tried it, but I appreciate the link. I'll look into do this!

3
AznsLuvRice•

My gate used to lift like yours. Went a meet and a guy swapped the struts around and now it opens all the way up. Took like 5 minutes. No extra parts needed.

3
telepoiss•

Can't remember if mine was this low but it goes pretty much horizontal now

EU low roof version

2
lunar_unit•

The back hatch is very heavy. Get someone to help you, or at least have a 2x4 handy to prop the door open. You'll gain around 6+" IIRC.

2
Acromins•

This worked great for me

1
weedgaze•

My gate lifts higher than that. You have a high roof model, maybe someone replaced them with low roof parts? Either that or yours are malfunctioning. On the side of the casing it should say 4WD HIGH ROOF.

Here's a pic of how high mine goes.

3
UKtwoOP•

That looks exactly like what I'm after. Thanks a bunch!!

1
telepoiss•

Did you get it sorted out?

2
UKtwoOP•

Yep. Turns out someone in Japan had installed a little bracket to mount the struts lower for some reason. I removed it and flipped the struts for good measure. Now it opens as high as the roof.

2
UKtwoOP•

It looks like the top of the lift gate clears the roof regardless so I'm wondering if anyone has experience raising it so that it opens more level. I've had a bunch of friends clock their noggins on it and it would be nice if it stayed flat like a canopy rather than angling downward like it does.

1