Zero 9 speed limiter cable?

Posted Aug 31, 2019, 2:27 PM UTC

Posted Aug 31, 2019, 2:27 PM UTC
That Grey/Black cable is the limiter.
Thing is, it's already unplugged. Meaning it's not attached to anything
Usually that means it is already "unlimited" You can try plugging in see what happens..
Can't seem to find the plug it's supposed to go into.
It's limited, even the brochure says so sadly :/
It won't go over 26-27 km/H and I would love to have the speed it is capable of from standard.
Usually it's a single wire connected to self (grey wire) You connect it to "its self" so if it is the wire you think it's two lines/ you just bridge the connection. I'm not saying you should do this - you need to do some research. I don't want you to damage the system. I have taken controllers apart just to verify the location wires are going to. Sometimes you see a booster connection plug with a red wire loop.
please check dm
Wait, what? I didn't know the 9 had a speed limiter. Damn, I'm gonna happen a have to open mine up now and look.
u/smutte helped me solve it, the power level was not set to 100 so Max speed was only 25-27 km/h.
Went trough the wires for like two hour's, disconnecting and testing.
How water resistant is this scooter?
Well so far I've driven it when it rains, after a rainy day and it's still pretty much fine.
Although I avoid puddles so the deck doesn't get submerged
There are two ways to limit power. Cable but also the software/“p-menu”. I guess you checked both?
How do I check this? Might be the issue
Its easy to find instructions online. I don’t remember the exact menu item number. You press and hold “mode” and “power” button for a few seconds and u get into a menu. Here you control stuff like motor power limit, acceleration modes (slow to aggressive) but also weird things like voltage (don’t change), tire size, km or miles etc
Power level was Limited, now I can get up to 47! Thank you so much :)
Enjoy and stay safe!
Google for it, Zero 9 p menu