Fairly simple pattern but damn, as a beginner it sure is a challenge to master chisels. Mastering grain direction too, but already through the process so far i feel like i know from what side to approach the cut. And which side screams tear out. I like this hobby so far.

Fairly simple pattern but damn, as a beginner it sure is a challenge to master chisels. Mastering grain direction too, but already through the process so far i feel like i know from what side to approach the cut. And which side screams tear out. I like this hobby so far.

Posted Sep 21, 2019, 7:03 PM UTC

362
RomanizingKorean•

Good job for a beginner's project, mate. I use carving chisels all the time. The key to making your work easier is keep your chisels razor sharp so that it does not require a lot of strength to make the cuts. Use 3M 2000 grit compound on a piece of leather to make the final sharpening swaths. If you do this just right, the blade will be wickedly sharp.

Also, make sure you keep track of the grain of the wood--if you carve in the wrong direction, you might get a tear or a rip, instead of a smooth cut.

2
oddingarOP•

Yes. My chisels are getting duller, I definitley notice that already. I do have stones, grit compound and leather, however I am very worried I might end up ruining the chisels by doing it wrong.

Don't get me wrong, I've tried carefully to sharpen the straight chisel, and one of the curved ones, too, and it seems to work fairly well, but I'm doing it slowly until I build up skills to maintain a steady hand.

I also bought a honing guide but my chisels doesent fit. So that's a Bummer. :p

I will most likely be investing in diamond stones or get tempered glass/sandpaper to make sure the surface is flat enough. The regular stones I got seem to get uneven really fast and it's annoying having to flatten them all the time.

I don't know what grit the compound I got is, but the edge seems noticeable sharper/better, so its probably higher than 8k grit stone.

Thank you for your reply.

2