G903 connecting through the Powerplay
Let me just share this. I bought the G502 wireless last month and have been using the 502 and 903 (502 for gaming, 903 for daily driver) since. Yesterday I decided to use the 903 on my laptop but Ghub isnt detecting it. So i did the usual troubleshooting, reinstalling ghub, unplugging the adapter etc. Then i noticed that the 903 was connected to my desktop even though the dongle was in my laptop. Full function, battery, profiles were all working perfectly. So i decided to unplug the 502 dongle thinking it was connecting through it. But to my surprise it was still connected to my desktop so i unplugged the remaining dongles, bluetooth and wifi. As a result nothing else was connected even my wireless bluetooth keyboard but the G903 was still working perfectly and can be seen as connected to my desktop ghub. So i was thinking that this has got to be some kind of sorcery or something. Then i decided to unplug the Powerplay which actually worked. The G903 was now disconnected from my desktop and was finally connected to my laptop. So i plugged all the dongle back in my desktop (except the 903) and restarted both laptop and desktop and everything was fine and working as expected. Thing to note though is when i restart and the 903 on the powerplay it will detect the 903 again and will be connected to the desktop. So i guess the software gets information through the Powerplay and registers it to wherever the Powerplay is connected
Edit:
-Couple restarts and the 903 is no longer detected by my desktop
-Unplugging the 903 dongle from my laptop automatically connects it to my desktop. Unplugging the powerplay resolves it.
Posted Sep 22, 2019, 4:03 PM UTC · edited
This is working as intended. The Powerplay replaces the dongle.
It only works on my 903 and not on the 502. I plugged the 502 dongle on my laptop and its working as expected.
You can only pair one mouse to the powerplay at a time. Your 903 is paired to the powerplay and it's dongle, your 502 is paired only to it's dongle.
Hmmm.....i'll check on that later today. It's 1am where i'm at. Any idea on how to unpair?
Um. I'm not sure you can. I think the way it works is that if it's unpaired, it automatically pairs with the next mouse it detects. And I'm not sure there is a way to completely unpair it after it's been paired the first time anyway. You can pair a new mouse, that's a thing.
I don't know about ghub but in LGS, I just select the Powerplay and there's an option there to force it into "pairing" status. So when I had to replace my g703, the process was turn the old mouse off -> force pairing mode -> turn new mouse on. There should be a similar function in ghub (hopefully).