1st salmon skin, you will need some tl smoothers to fix this
2nd your infill is showing like crazy, what is your wall count and what's the wall overlap? Increase number of walls to 3 and decrease overlap to 0-15% depending on the nozzle size, bigger nozzle less overlap
You have a bunch of issues here:
1st salmon skin, you will need some tl smoothers to fix this
2nd your infill is showing like crazy, what is your wall count and what's the wall overlap? Increase number of walls to 3 and decrease overlap to 0-15% depending on the nozzle size, bigger nozzle less overlap
3rd invest in a good Extruder
Well shit. I can tell you that I've just switched to a 0.6 nozzle and the wall count was at 1 / 0.8
Still using the stock extruder would my anet a6, could it be a voltage issue?
[deleted]
Oh yeah, 2 walls did the trick for the most part. A few zits where the layer finished but it looks a ton better.
Infill was first, wall second. Thanks for the help
I don't see any salmon skin artifacting. It's just grid infill showing through.