Need some help with tire pressure on 650x47 gravel rig. How low is too low?

2020 Kona Rove ST, 650x47 WTB Venture tires set up tubeless. I'm 164lbs and dropping and by past experience will settle in at 150-155lbs.

I've been running 30 in the front, 32 in the rear as the minimum on the sidewall states 30lbs. I know I can go lower, did it off the bat on my mtb but used that as a starting point.

So what do you guys run in your 650x47's?

Posted Sep 29, 2019, 3:07 PM UTC

13
LancesLostTesticle•

Before I got rid of the bike, I was riding 26"x50mm tires at 25psi.

1
spacecoyote_•

Depends on weight, tires, rim, and rim width.

If you look up ENVE's recommended tire pressures for their rims and given rim widths, the pressures can go as low as the high teens.

I'm running 20-22psi with 650x48 mounted on 23mm internal width rims.

1
pedalstrike84OP•

That's pretty dang low, pretty close to what I ran on my 2.35" on my mtb. I'm running 23mm internal rims as well, maybe I'll shoot for 27/25 next ride and see how it goes

1