Print warping on corners on glass bed [Settings included with pictures]
Recently my prints have started warping at the edges as the first couple layers get printed. I haven’t modified any settings since the prints started warping. I switched a couple weeks ago to the glass bed and got it leveled well after many hours of profanity and frustration. I have been running my prints at a bed temperature of 65 c. The first layer sticks well. I have initial layer width at 150% and initial layer height at 3mm as suggested by the makers of the EZABL sensor that I use. I also have the initial speed set to 15mm/s I had prints that were printing fine without the warping. Attached in the link is images of the warping as well as all of the settings that I have changed from the stock settings. I am also using the most recent marlin software on my printer. I read that the height at which the fan begins running can be set so that the initial layers cool more normally and deform less. But I haven’t been able to find the settings in Cura (4.1.0) that could allow me to change that. Can anyone provide any assistance?
Posted Oct 8, 2019, 2:12 PM UTC