Luxury Vinyl Plank on a consistently unlevel concrete floor?

Curious about this - I know that LVP on a floor with dips and bumps will be problematic, but what about on a basement concrete floor that is consistently unlevel?

Basically the people who renovated the house I bought cut a lot of corners and did a lazy job. The basement floor slopes towards the right side of the house on a downward angle. It doesn't bother me too much but it's definitely there. However, it does seem like they smoothed out the floor so it's consistently unlevel in the same direction throughout.

If that's the case and I grind out the few minor high spots throughout, would I be able to lay an LVP floor with no issues? Or would it not work at all if it's not level?

Posted Nov 3, 2019, 4:04 PM UTC

69
stan325-2•

What matters is the flatness of the floor, not being level. If the concrete slopes away but is flat then the LVP will be fine on it from a performance perspective.

9
64robotsOP•

Perfect thanks

1
bandalooper•

You might consider using vinyl trim and caulk along that wall where all of your spills are going to run to.

2
karty44•

Slope doesn’t matter. Flatness matters. Run a long level across your floor and address any low spots with filler. I just replaced 1800sqft of LVP for hardwood laminate because our subfloor wasn’t flat. LVP will clap and flex until the joints break. It’s great in a basement or bathroom. Just make sure it’s flat.

3
64robotsOP•

Thank you!!

1
Aaathunessa•

What about some self-leveling flooring poured on the floor first to even it out? Did that in my washroom and it worked wonders.

2
64robotsOP•

It’s a huge basement and I work in it currently so don’t really want to deal with all that - moving in a couple years otherwise I’d consider it

1
JungleSumTimes•

Won't cause any issues. Leave an expansion gap at the walls and fill it with big stretch caulk

1
64robotsOP•

Thanks

1