Advice on a personal project: how to fix flexing disparity on a gripper?

Mechanical

This is a question to prosthesis engineers or those who are well versed in gripper technology. I’m trying to create a multi-staged differential system for a gripper on a personal project. A simple whiffle tree was my first and most suitable design choice with a single motor and cable transmission. The problem here is when I’m optimising the compliance and stiffness, one of the fingers always actuates before the other two. It’s not a HUGE problem but when I’m doing demos to people, it looks very odd to have one finger completely flex and then have the others flex. Does anyone know of a fix to this?

https://i.imgur.com/Vy1riH9.jpg

The two articulated fingers flex to towards the pad.

I’ve linked a rough alpha prototype to try risky stuff on while I sort out the dimensions. I’ve tried to optimise it by doing basic kinematic calcs but the flexing disparity is still present. Advice is welcome.

p.s: please don’t judge the drill bits being used as hinge screws.

Posted Nov 11, 2019, 5:23 AM UTC

10

No comments yet

Nobody commented on this post, or the comments weren't captured.