r/hometheater•
K4lim

Acoustic absorption on a radiator

Install/Placement

Hi,

I bought some acoustic panels for my room because currently it's just naked concrete walls with my equipment in it. I measured the places where I should hang the panels with the mirror technique but at one of those places is a radiator mounted to the wall.

What would be the correct way now to cover up the radiator? Just cut out the panel to the radiator size and glue it on? Is there anything I should consider before doing so?

Thanks in advance!

Posted Nov 22, 2019, 9:51 PM UTC

13
Shivdaddy1•

Don’t set the place ablaze!

1
Toiletwands•

As long as you are making your acoustic panels out of materials which don't spontaneously combust at a low temperature you should be fine. Glue will most likely not hold the panel on there due to the heat of the radiator, which can be as high as 190 degrees F depending on if it is steam or hot water. I wouldn't worry about covering up that radiator though, the sound would only really reflect off a bare wall, radiator will diffuse it a little.

1
K4limOP•

So I'm better off just putting the last panel on some other place. Thanks for the help!

1