Yd2s gyro help (Rpg-302 v3).
Hey guys, I've bought a Yokomo YD2s but the gyro is either malfunctioning or isnt set up properly and since its a pretty nice one, I want to see if I can fix it with the help of some of you.
So first, when everything is connected, it all respond, servo and engine works fine, the trouble is that for some reason, the car is moving her wheel left without me touching the wheel on the transmitter when its rolling on the ground. Led of the gyro is red.
Receiver is a sr3520, not sure if the 3rd channel is push or pull. Could be the problem ?
Any help is appreciated as I am a noob with gyro.
Posted Nov 26, 2019, 4:12 PM UTC · edited
56
When are you turning the esc on? I’ve always heard it’s best to place the car on the ground then turn it on so that the gyro is configured properly. Btw if your on Facebook there’s a couple rc drifting groups that are really helpful with this sort of thing. The RWD RC Drifting Society, Super-G R/C Drift Group are a couple of the ones I’m a member of.
Yeah I notice the car needed to be leveled already. Sadly the wild steering stayed. The weird part is that its going fine backwards. Anyway, I'll check the group on facebook. Thanks.
if you could send a vid that would help, maybe you need to turn the gyro down?
Yes I made one, in the video, I just applied throttle, I never touched the steering wheel on the transmitter. Here's the link, sorry its a bit dark :
https://youtu.be/fLogG9S0P0k
Definately your gyro, turn it down a bit