Fireplace Switch Question

QUESTION

I've got a Hue hub and a Lutron hub, and both are connected to Alexa and HomeKit. I have a low voltage switch that controls my gas fireplace that I’d like to make smart. I can’t seem to find a solution to this problem, but I’d be grateful for suggestions. Stand-alone WiFi switches are an option, but I can’t find one that works.

Posted Nov 30, 2019, 11:50 PM UTC

09
mikeisflash•

This is what I use with my fireplace. Works with my SmartThings hub.

"Made for Amazon" THIRDREALITY Smart Light Switch (Gen2 1 PACK) https://www.amazon.com/dp/B07K3TRG6W/ref=cm_sw_r_cp_tai_1AY4Db6NHQNTZ

They now sell a version that comes with its own zigbee hub.

Third Reality Smart Light Switch (Gen 2 Starter Kit) - Everything you need to control any Toggle or Rocker wall switch, No Wiring Required. 1 Switch and Hub. Works with Alexa and Google Home. https://www.amazon.com/dp/B07HGXMFJ3/ref=cm_sw_r_cp_tai_oCY4DbHM9Z6W8

2
mrBill12•

I use a relay with a 120v coil. I took a typical lamp extension cord, cut off the female end, stripped the wire back and attached it to the relay’s 120v coil. Attach the low voltage of the fireplace to C and NO of the relay. Plug the male into your favorite smart plug. Add a WirelessTag.net sensor for temp.

1
scpotter•

This. Using a relay is the correct answer. Once you realize that the fireplace uses the pilot light to generate LV and closing the circuit (existing switch or future relay) opens the gas valve will help you find a solution that works.

To clarify, the smart plug has to be powered by 120v (not how your switch is powered) and you will no longer use your current switch (well, I couldn’t figure it out anyway).

1
RichardBLine•

You can follow the instruction in this thread: https://old.reddit.com/r/homeautomation/comments/avfx8y/i_wrote_up_how_to_use_a_caseta_switch_and_a_pico/

Also, there is a Homekit sub you can ask Homekit questions in: https://old.reddit.com/r/HomeKit/

1
TCaschy•

I use a switchmate and a spare raspberry pi to communicate with it.

1
mudboneOP•

I am homing in on this type of switch to do the job. I am curious about the Raspberry Pi control. Would you mind expanding on why you added this? I have not delved into this world yet, tho it does have me intrigued.

1
TCaschy•

Not sure if this is for novice Pi people but I'll post how I control it. I use a python script written by Brian Peiris ( https://github.com/brianpeiris/switchmate ) This does all the work running on a Pi and I just call it from any device by having the Pi run a simple webserver that is attached to this python script.

1
[deleted]•

[removed]

0
mudboneOP•

I’m starting to understand this “problem”.

1