Zone Valve, which motor for V8043G1125/U
Hello,
I need to replace the motor in a Honeywell V8043G1125/U. The page I found on it lists these two motors:
- 802360JA/U
- 802360UA/U
When I bring up the pages for those motors I see the first is "Used with: V8043A,E,F", while the second is "Used with: V8043J". Neither mentioned the G version.
Can someone tell me what the difference in these two motors is, and which I should be looking for?
Thanks!
Posted Dec 2, 2019, 11:25 PM UTC
313
You need the JA/U. The other motor is for steam. You’d have better luck just buying the whole power head vs just replacing the motor. If you get the whole power head you unscrew two screws and pop it off and put the new one on.
https://www.supplyhouse.com/Honeywell-40003916-026-Replacement-Head-for-V8043E-Zone-Valves-8632000-p
Awesome. Thanks. Out of curiosity why is it best to replace the whole power head? It looks like the motor is just one screw.
Also will the one you linked to work with the
Gmodel? It says it's for theEones.Can you post a picture of what you’re replacing so I can double check. Sometimes they change out numbers.
Of course. I added 4 at https://imgur.com/a/2YSomZ7. Let me know if I missed anything.
The valve was sticking opened. I removed the screw on the motor to close it. It looks enough enough to replace, but I'm all for replacing the whole thing if that makes more sense.
Yeah, what I sent you will work.
When you manually closed the valve did the stem move freely? If it was really hard to move that could be what killed your motor.
I’ve seen both, they get stuck open from the stem being stuck. Or they get stuck open because they opened too far and skipped gears and got stuck.