r/oilpen•
Xels

Experimented with making a cart using Pyur thinner and some thca diamonds. Results were so thick and it hits smoother than any cart I've ever tasted, even top grade dispo carts! Bout a half g of dabs and 4 drops of Pyur.

Experimented with making a cart using Pyur thinner and some thca diamonds. Results were so thick and it hits smoother than any cart I've ever tasted, even top grade dispo carts! Bout a half g of dabs and 4 drops of Pyur.

Posted Dec 17, 2019, 8:34 PM UTC

208
VentURE-Hives•

Pondering this....

1
XelsOP•

I'm so happy I did it. Just make sure you get a good cart. I was using distillate in these PCKT brand carts and thought they were junk until I made this batch and had my mind changed.

2
ttrspm2•

can you educate me on why I should use pyur instead of wax liquidizer?

1
XelsOP•

From what I've researched it is just hempseed isolate. Basically, it contains the same stuff that is in the "remainder" of any extract. You got 80% thc and 1% CBD and some Terps, what's left is usually hempseed oils. I'm not going to claim its 100% safe but this cart feels smoother and less harsh than any cart I've bought. I've traveled to cali and Washington and tried thier top brand ls and this is still smoother. Granted thca crystal is a nice starting material but the pyur let's it shine rather than dull it.

2
ttrspm2•

Perfect explanation, you’ve convinced me! Thank you!

2
ogee42•

did you decarb? i can’t even get my shatter to be viscous enough at roomtemp recently with 3 drop/gram of pyur plus decarb. shits so fucking thick my cora pods aren’t even warming them up, basically just burning coil unless i preheat. been thinking about winterizing but i know it’s mildly dangerous to smoke winterized product without using a vacuum chamber to get the entirety of the ethanol out, and it’s just a pain in the ass. i just think there’s way too much fats and lipids in the shatter i’m getting to even use in a cart, decarb or otherwise. fucking retarded trying to put bho in these things

1
XelsOP•

So, I heated the stuff up till some if th Terps started to boil, I actually used a drill, heat gun, and dental pick to perform this. I mounted the glass syringe with the cap on, plunger out (I have screw in plungers so I can put them into a full syringe and screw it tight once I evacuate the air bubble) on top of the drill and spun it at low speed and heated it with the heat gun until it was melting and added 4 drops of pyur. To mix, I stuck the dental pick in the syringe and spun up the drill for a bit until it seemed all mixed up. Put the plunger in place and filled my cart. Only issue is I will let it sit forna day next time. There were too many trapped bubbles that expanded a bit when no longer under the pressure of the syringe and made a little mess. Otherwise it was easy and I would do again. I can post a pic of my starting material and setup later

2
pdwoof•

Ever tried the liquid diamonds by buddies ? I wonder how this would compare

1