Homemade pottery wheel or buy?

My girlfriends has taken an interest in pottery and I was thinking about buying her a wheel. When I looked at anything of decent quality, they were $400+. I have experience with wiring/electrical systems and don’t think it would be too hard to make one, but I wanted to ask. Is there more to it than just a variable speed wheel? Why are anything other than beginner wheels so expensive?

Posted Dec 25, 2019, 8:35 PM UTC

26
[deleted]•

[deleted]

1
thaidrogo•

It's more than just putting an electric motor to drive a wheelhead - it needs smooth speed control from 0 - 250 rpm, and a great deal of torque for centering. The frame needs to be heavy and rigid, or it will move around while you are trying to work. Just keep these things in mind while designing your wheel, and maybe study the specs of commercially-made wheels to get an idea of what will work. Lots of potters have made their own wheels, and already knowing electrical systems is a big advantage.

1
backstabbuildOP•

I’ve done a lot of work with electrical motors and nothing here should be difficult to obtain. I’ll give it a go and report back to this sub and let you guys know how it goes. Thanks for the heads up.

2
sunnysomebody•
1
archaedon•

$400 is about the bottom for a new one. Check for used on offer up or craigslist though. There is a youtube for a $50 DIY wheel that seems reasonably easy. OR better is if you get her into a local studio that may have the kiln as well

1
KayHodges•

I was going to say the same. Really you're going to drop at least a grand for a good wheel. Clayboss has some lower priced options, 6-700 USD range. But I think it would cost even more in materials and time to put together a one of that quality in a home workshop.

2
JCVPhotoI like blue•

A lease might be an idea. In my city, wheel lease is about $45/month CDN

1