Anybody else try to put sequential led indicators on their bike?

Anybody else try to put sequential led indicators on their bike?

Posted Dec 29, 2019, 12:06 AM UTC

45
vadersfinalsolutionOP•

I recently purchased some Yoshi sequential led indicators and I just cannot get them to work. I've tried 4 different relays and a set of resistors. The indicators erratically blink and dont complete the sequence after the engine has warmed up. With the engine off they work as intended. I've scoured the internet and cant seem to find a fix or even someone with a similar issue

1
Stinky_T•

I’m good

1
slaserj•

I have some, mine work great! Make sure you’re using a 7-pin relay make for leds. I got mine from eBay for $13 ish. No resistors, and you should be good to go.

1
vadersfinalsolutionOP•

I bought a cheap 7 pin off Amazon, then one from TST, even wired a 2 pin relay for a CBR that has a rate adjustment and all had the same results.

1
Fasterest-v1•

12 o clock labs sells a kit for the edge 2 tail light that integrates them I know its not what you have but if you offroad a lot it's a worth it.

1