Self constructed and made lamp stand for the high-detailed moon
Posted Dec 29, 2019, 10:13 AM UTC
646
For more pictures: https://imgur.com/gallery/Hh8fmOt
1
Do you have a STL for your moon with cutout and the lamp base?
1
Posted Dec 29, 2019, 10:13 AM UTC
For more pictures: https://imgur.com/gallery/Hh8fmOt
Do you have a STL for your moon with cutout and the lamp base?
Nice...
What size is the Moon?
What settings did you use? and what filament??
Also I assume you bought the electronic pre-wired?? What did you need?
APG
The moon is 100mm in diameter. You can find the files to the moon here: https://www.thingiverse.com/thing:3242080
I then put it a little bit into the ground to get a hole at the bottom
The settings can be found here: https://www.instructables.com/id/Progressive-Detail-Moon-Lamp/
I now use the support settings for almost everything and it works so amazing! You really should try them, everything comes off perfectly and the print side also looks very good.
The electronics was thought about and soldered by myself, but yes the components are bought. Just standard 5V power supply, barrel connector, Arduino Pro Mini (here I wrote a little bit of code to do what I want, this is also a point I might want to improve), Neopixel Jewel and a lever for switching everything off or on. And some wires with 0.25mm².
Thanks u/Heenne, The Moon is on my list of things to do... :-)
APG
[deleted]
Oh! Sorry, totally forgot about that!
I used standard white PLA.
Here is the link
Its 1.75mm white PLA from Janbex. Good filament, I also use the black one from them. :)