Help a newbie out with suspension upgrade?
Hey y'all, first off I apologize for my ignorance. I'm just now getting into off-roading stuff, and I'm not as much of a "car guy" as some of you are.
(And if this is the wrong subreddit, let me know and I'll delete this)
First off I have a 2011 4x4 Nissan frontier, extended cab.
I wanted to upgrade my suspension, as it's got almost 140k miles on it and it's feeling pretty rough with me starting to get into rougher roads. I was going to go with Bilstein 5100's on both front and rear, but I realized that later on down the road I definitely want to add an armored bumper with a winch.
I also have a hard top rooftop tent (150-ish lbs) that I'm going to be putting over the cab, as well as a leer bed cap.
I figured I needed to get a heavier duty suspension upgrade so my truck can handle all this new weight, as well as not droop in the front from the new heavy bumper/winch.
This is what I found: http://nissteclifts.com/Complete-OME-Suspension-W-OME-Leafs-05-Frontier_p_706.html
Would this be a good choice to get outfitted to my truck? Would I also need to get a lift kit or something to counteract the new weight? Any advice or assurances would be appreciated. Thanks!
Posted Jan 13, 2020, 3:43 AM UTC
Old Man Emu and Dobinsons kits are a pretty solid choice. We carry both for the Frontier and they’ll do the job just fine. Both kits will lift your truck roughly 2” over factory ride height and the included shocks will be just fine for most uses.
If you’re interested in a kit with American made springs, our ADO kits are a great option. We pair the kits with Bilstein 5100’s. I’d recommend our medium coils and also the AAL or the full ADO performance leaf pack upgrade in medium load configuration. Both should support the planned upgrades you’re looking to.
https://www.alldogsoffroad.com/alldogs-offroad-complete-lift-kit-w-bilstein-5100s-for-2nd-gen-nissan-frontier
https://www.alldogsoffroad.com/dobinsons-2nd-gen-nissan-frontier-medium-load-20-lift-suspension-kit
https://www.alldogsoffroad.com/old-man-emu-2nd-gen-nissan-frontier-suspension-lift-kit-lightmed-duty
Sounds perfect! Thanks so much.
This is pretty much what I was looking for also, though I don't have as much loads pre-planned. Do you have instructions for install? Is it something a home mechanic can do (other than the alignment after), or should a suspension shop really get after it?
Thanks!
It can be done at home with a jack and stands but if you’re diy’ing it we recommend opting to let us assemble the front coilovers for you. We are set up with a good spring compressor.
We have instructions for the rear AAL written up but don’t have install instructions written up for a complete kit install. Feel free to reach out and we can walk you through the steps.