Can someone identify this motor?
Hey guys, can anyone identify this motor? Pic 1 Pic 2
I inherited a DIY quadcopter that's missing a motor, the other three are the same. The model I found that is the closest is this, but the housing is a bit different. Can I use these two on the same build?
Posted Jan 14, 2020, 10:57 PM UTC
44
http://www.rcdetails.info/en/details/6856
Turnigy Multistar 4225-610KV 16pole outrunner motor.
If you need more info for them this forum thread i stumbled upon has some extra info like prop size etc...
https://www.rcgroups.com/forums/showthread.php?2098749-%287%29-Turnigy-Multistar-4225-610Kv-16Pole-Multi-Rotor-Outrunners
Nice, thanks. That's the same one I found, I don't know what kind of prop mount that is though.
I have a very similar prop mount (Pointy top part)
When you loosen the top it will unlodge itself from the motor pin, allow you to place the props on and slide it back on the pin. As you tighten the top part it will sqush everything together and pinch the pin on the motor holding it tight.
This is the worst way to explain it but yeah. They're pretty decent motors. The one's you have are a little older but will work just fine for an F550 type drone.
Got it. I only have three of these, and I can't seem to find this type of mount anywhere. Might have to replace all of them.