Feeding nintendo switch audio through mixamp

Question | Astro Response

So I'm wondering if it's possible to recieve Switch audio through my mixamp while it's also connected to my PC. I tried using a male to male 3.5mm jack in the aux port, but I get a horrible buzzing noise, so I'm guessing I just got the wrong cable or something. Is what I'm trying to do possible?

Edit: forgot to say, I'm using the new astro a40 + mixamp.

Posted Jan 19, 2020, 10:36 AM UTC

12
ASTRO_Vertigo:astro: ASTRO Staff / Community Support•

Hey WalkingGarbage ,

The buzzing noise is probably because your MixAmp and your Nintendo Switch are on two separate power sources with separate grounding points. You could try adding a 3.5mm ground loop isolator in between the 3.5mm cable and your MixAmp which should remove or reduce the buzzing to a comfortable level.

The only alternative is to purchase an HDMI audio extractor with an optical output. This would sit between the HDMI cable and your monitor or TV and can provide optical audio from the Nintendo Switch. The only downside is the ASTRO Game device under Windows will be muted when the optical cable is connected. However, the voice audio and the microphone will still work fine.

1
WalkingGarbageOP•

Looks like I'll need to get a ground loop isolator then. Thanks.

1