[Review] Rincoe Manto AIO

Review

Welcome, everyone! Pod mods are creeping up and finally, companies are trying their hands at Billet Box type of devices; let's have a look at one such AIO: the Rincoe Manto AIO, which Fasttech was kind enough to send to me for the purpose of this review.

Rincoe Manto AIO

Raijin is such a badass

Table of contents

  • Hard facts
  • Soft facts
  • Totally personal take
  • Pros/Cons
  • Summary
  • Disclaimer

Hard facts

this is an AIO (18650) with VW, TC and bypass

Soft facts

front (airflow & AFC) | side | side naked ooh la la

What do you expect for 26 dollars and change? Probably as little as I did when I unpacked the Manto AIO. Suffice to say, the device was a pleasant surprise. The frame is sturdy, the buttons are clicky, the tank is well designed. The biggest surprise, though, was the graphic; really well done for the price point. I'm not sure how it's done, I think it's spray-painted and there is also some modeling (?) involved, which gives the Raijin a (very very) slight 3D effect and in turn yields a nice hand feel. I tried to beat up the mod as much possible (scratching it, putting it in my pocket along with my keys,...) and the paint only showed minuscule signs of wear and tear. 

detour: I tried to find out who or what exactly (a) Raijin is, but no dice. Just like with the Tengu, for me it's impossible to follow Japanese mythology (ever delved into antique Aegiyptian stuff? that's pretty much the same cluster-fuck); that wild mixture between Shinto, Buddhism, folklore, and history is impossible to untangle for someone not growing up with. Still, the Raijin seems to be a badass and as such, the graphic is a big win in my book.

However, there are a couple of things that hint at the Manto AIO being cheap: the drip tips (standard 510) are a tiny bit too loose (of course, this also happens on stuff way more expensive), the screen is easily scratched (however, after two weeks of a beating, I still don't have any issues reading it) and there is an itty bit of door rattle (half a mm, or so). Nothing too severe, though, IMHO.

The only thing that was upsetting was the smell of plastic. I really don't think it was the tank, and I think I also can rule out the drip tips, which means the mod itself smelled. After a couple of days said odor already diminished by a lot, but it took a bit over a week to completely vanish. So, not a long term problem, but still for about a week the Manto AIO screamed $26.

In terms of functionality, nothing to complain. The chip is pretty straight forward (modes: VW, bypass and TC (Ni200, Ti and SS316L), with the only added feature being an auto adjustment for Watts when it detects a new coil. This is a feature I really dislike, but since normally coils aren't changed often, it's something I can easily look past.

The tank, on the other hand, is thoughtfully designed. It comes with a notch for easy pulling out and is secured via a spring-loaded contact. We have a silicone plug for some easy side filling and the coils are secured only via O-rings which makes changing them a breeze. Filling the tank was a bit weird for me because I used 120ml bottles, which come with a large diameter and so the bottle extends to the edge of the tank and hence, I wasn't able to determine the juice level too well while refilling. I overfilled only once, though, and I didn't employ the utmost care, to say the least. So, a nitpick and not a major con. The tanked also never leaked on me and, to my surprise, I also didn't have any problems with condensation.

The AFC is screwed onto the coil and sits at the bottom of the tank. There is quite a bit of knurling so dialing in should be easy, but there is a bit too much friction; so it takes some effort to get to the level of restriction one is looking for, but if it's not constantly used, it also doesn't matter.

The air inlet of the mod is decently placed. While I have either my palm of my fingers in its vicinity (depending on whether I'm firing with my right or left thumb), in two weeks of usage I covered the airhole twice. Pretty good.

Overall, the mod is nothing to complain about. Not a whole lot of features, and most of them are very well implemented. It doesn't feel cheap, it doesn't look cheap (maybe the Raijin can be called cheap-ish, but I find it to be quite nice, probably lies in the eyes of the beholder), you get well above what you pay.

So, the mod's fine, not only for the price but also in general. But of course, it's only as good as the coils for it.

There are three options: DTL, MTL, and an RBA.

The prebuilt ones...well, not really bad but also nothing to praise. Both put out decent flavor but show wicking problems. The MTL coil is indeed a proper MTL experience. At 20 Watts I found it to work best and actually enjoyed it for a couple of days. Resolution and range of notes were fine, there was just a lack with regards to bang. However, to get the coil to perform I needed to let it sit in juice overnight. No amount of priming puffs sufficed, it was just really slow to start. After the break-in period, however, no problems.

With the DTL coil, it was pretty similar. The best range was stated to be 40 to 50 Watts, however, I wasn't able to get there. I let it sit in juice for 15 minutes and couldn't go higher than 30 Watts. After spending one night soaking it, I was able to push the Watts to 35. One more day of bathing the coil in liquid let me go all the way up to 37 Watts and sometimes even to 40 Watts. Going higher just wasn't possible.

Which is a shame, because pretty much every additional Watt increased the enjoyment. Also, at 30 Watts DTL wasn't possible, I had to go to a loose MTL draw for flavor. At 40 Watts I could dial the AFC to a nice RLH, and if I would have been able to go to 50 Watts, I bet it would have been a very nice DTL vape.

The coils actually performed nicely, but the amount of time they needed to work is just too much. When I want to vape, I want to vape and not wait half an hour, let alone days. Getting the Manto AIO for the prebuilt options isn't something I can recommend.

So, let's hope the RBA is a winner.

RBA on the 510 adapter

The chamber, as well as the one-sided build deck, is small as fuck, there is only little space between the two posts. The bottom airflow hole, however, is quite large (about 2.5mm), so at first, I was quite puzzled about what coil I was supposed to put in. Now, I didn't expect there to be some coils in the package (4 bucks and change for the RBA...), but some pointers would have been appreciated.

So I used an *I don't know what I'm doing-*build: 24ga with a 2.5mm ID and a couple of wraps. While the deck isn't anywhere near the worst ones, it's a bit finicky because of the screws. I despise flat-headed, but whatever. However, they went with the tiniest option available, which means I couldn't use a proper screwdriver but had to use a Barbie one, which was really finicky. Also, leads have to be clipped really close to the posts or otherwise the cap won't fit.

Thankfully, Rincoe packed in a 510 adapter, so I was able to build on a proper mod and was also able to dry burn the build.

Performance of the RBA? Pretty much what you make of it, it all lies in the wicking. Vaping gave me quite a couple of pet-peeves, one of them: Genesis decks, especially those without a proper delimiter. You see, on the one side, the juice channels are established by the deck itself. Opposite of it, we only have the cap, which means I only know how good my wick job is once I vaped for a bit on it, because there is no proper hole to put my cotton in.

Te-de-ious. Just plain te-de-ious. I do understand that there are constraints to the design because of the size, but I would have liked to see some other implementation.

If you don't nail the wicking you either flood the deck or choke the channels; when a beginner uses the RBA, my money is on choking, though. The holes are really really small. For the 2.5mm build I had to rake and cut the cotton to size, despite using a bit too little. After the first couple of hits, I disassembled the RBA and cut the sides of the cotton some more; after a couple of days, I again took it apart to cut the ends so they are about flush with the holes.

If the wick job is good enough the RBA is quite a treat. While I wasn't able to get it way past 30 Watts (didn't wick fast enough because of the rather tiny juice holes), up until this point it was a flavorful experience. Of course, not something bonkers, for example Tripod-like levels, but for a beater mod, that can literally take a beating, I was satisfied.

Totally personal take

The Billet Box. Since the day I first saw it, I wanted one. There are a couple of reasons, why I never pulled the trigger, though. Problems with condensation; the process of building and rewicking is tedious. The dire need for some face lifting (no USB port for a DNA60? WTF? and why do the boro tanks still need to be secured via a screw-in piece?). And, of course, the price tag. 100 bucks even for a clone (which at least comes with a USB port) is quite steep considering that I'd need to buy a couple of bridges as well (20 bucks and more even for the clones...).

I always was puzzled, why no company took the chance to...pay homage...to the Billet Box and release a more comfortable version of it. Forgo the billet aluminum, lower the price point, streamline the building and wicking and it should be a killer device, right? Probably because of squonking no-one bothered.

However, all the pod mods creeping up lately paved the way for some companies finally trying their hands at Billet Box type of devices.

I gladly jumped at the opportunity to review such a device, and my conclusion about Billet Box type of devices: really nice take on beater mods. When I'm out and about, the portability gained by the lack of an atty on top indeed makes a difference; not all the difference in the world but certainly bigger than I anticipated. And compared to pod mods, the Manto AIO is not that much bigger and it offers the upside of using 18650s.

For me, such devices really strike a nice balance between a mod with a proper atty on top and pod mods.

Having said that, such AIOs are also the devices with the most untapped design space in my opinion, especially in terms of QoL issues. For example, the Manto AIO: Rincoe doesn't seel spare tanks. I would have loved to pick up another RBA along with a tank so I can swap them easily and don't have to refill while I'm on the go. Also, I would have preferred a dual-sided airflow set-up, because it sounds nicer (even when this would mean less space for that badass Raijin). And, sadly there is only one RBA to be had, and it really is the most basic design possible.

For me, the device itself, despite possibilities for improvement, is still an easy 5/5 considering it's less than 30 bucks. The stock coils, tough, have severe wicking issues, so let's pretend they don't exist and assume the Manto AIO to be a device for rebuildables only. Final rating: 3/5. For beginners, the building is probably a bit troublesome and the wicking potentially rage-inducing. Once everything's set up, you are awarded a quite decent - but not stellar - (loose) MTL vape, because the juice channels don't allow fast enough wicking for RLH, let alone a more open draw.

Is it a bad device? No, certainly not; it's just a bit too niche. If it would perform a bit better, or let me set it up for RLH it would be an easy 4/5; if both things were the case: easy 5/5.

Or, to put it another way: please, Rincoe, do another RBA.

And since Rincoe shows more than just a token presence on this sub, I guess there is a good chance they read this review; so, let's end it with a letter to Rincoe:

​

Hi RIncoe!

Nice device, no severe complaints! But please, for the love of our wind god Raijin, do another RBA. Preferably something resembelling the dotshell, respectively the vapesnail. Easy wicking, easy access to the deck, what could one ask more?

Send me one, and I promise to shill the shit out of it.

Sincerly,

IPDN

ps: if you need ideas for another AIO...I have some ;)

​

Pros/Cons

ProsCons
mod's really solidstock coils have wicking issues
RBA offers quite decent flavorcan be a pain too wick
nothing really to complain aboutbut still, quite a bit left to improve

Summary

​

AIOBuild quality: breaks down when only looking at to not even door rattleEase of usage: special attention to I don’t even notice it’s thereMy thoughts summarized with an ASCIIStar reviewFinal thoughts
Rincoe Manto AIO■■■■□■■■■□ (AIO), ■■□□□ (RBA)(҂◡_◡)★★★☆☆great beater mod with the RBA; however, loose MTL at most, sadly I wasn't able to pull more than 30 Watts; also, wicking is finicky

Info & Disclaimer

  • The Rincoe Manto AIO was sent to me for the purpose of this review by Fasttech.
  • All of my reviews along with my recommendations can be found in these reddit posts: RDAs and everything else. If you enjoy filtering and sorting, I also packed my summary tables into a google spreadsheet.
  • I'm a lazy fuck. And English isn't my first language, so please bear with me.
  • A proper disclaimer can be found here.

Posted Jan 20, 2020, 9:30 PM UTC

2020
Badazdwww.badazdcoils.com•

Oh man all these Billet Box styled AIO mods have me locking my wallet away...

Thanks for the sweet review!! Looks like they put quite a lot of thought and effort into the Manto AIO.

Oh, and that RBA looks kinda nice! Lots of them seem super restricted so getting a looser option with the easy asymmetrical post seems like it’ll be a breeze for beginners to sort out.

4
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Yeah, they added quite a few nifty details, if only the juice channels were larger...

And yes, I think the actual building is really beginner friendly.

What bb styled device do you fancy the most?

1
Laz3rfac3•

Looks like a worse version of the Ratel XS

But always good to have options

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Not sure. Dunno how it performs, but the 5 (?) ml and the top fill surely are nice. However, it's also a quite a bit bigger, so I'd probably rather go with a squonk mod.

For me an aio needs some upside over squonks, the manto offers size. Not sure how the ratel could compete.

2
Cid-Conray•

thanks again for the review!

glad i haven't pulled the trigger on this one. i dislike RBAs that are completely in the tank, everytime you want to change something with the build or wicking you have to get rid of the liquid in the tank, and of course the RBA is covered in liquid as well.

​

on the other hand, a display and VW are really nice to have for a device this small, on top of 18650 batteries.

there are so many devices being released that have a similar looking pod, i wonder if the DotAio pods would fit into this one.

if thats the case, there would be a lot more RBA options all of a sudden.

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

thanks again for the review!

:)

glad i haven't pulled the trigger on this one. i dislike RBAs that are completely in the tank, everytime you want to change something with the build or wicking you have to get rid of the liquid in the tank, and of course the RBA is covered in liquid as well.

At least it's plug'n'play

on the other hand, a display and VW are really nice to have for a device this small, on top of 18650 batteries.

Yeah, totally. The manto is my benchmark for aios

there are so many devices being released that have a similar looking pod, i wonder if the DotAio pods would fit into this one.

if thats the case, there would be a lot more RBA options all of a sudden.

Capacity is different, so nope I guess

1
YukarinValPulse X + Profile 1.5•

Another great read.

If you want BB homages with > 1 RBA, check out the DotAIO. It has their own RBA, as well as a RBA from Atmizoo. Two RBAs are still more than one that most other BB homages have. 😉

The DotAIO has two versions now, a full aluminium expensive version, around $99, and a zinc-and-plastic ensemble at around half the price IIRC. Just be aware that the Atmizoo RBA could be more expensive than the DotAIO lol, depending on which one you get and if it was discounted.

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Another great read.

Thanks :)

If you want BB homages with > 1 RBA, check out the DotAIO. It has their own RBA, as well as a RBA from Atmizoo. Two RBAs are still more than one that most other BB homages have. 😉

The dotshell seems to be awesome, and might be good enough to make me look past the fixed voltage, but I can't deal with 2ml. Way too low capacity for me.

2
Cid-Conray•

as far as i know it is close to 3 ml with the Dotshell (like 2.8 or 2.9 ml).

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

once there is an SXK vapesnail I would bite my butt over not waiting for it...

2
Cid-Conray•

lets hope the Vapesnail adopts the "any time" easily accessable deck of the Dotshell.
and i have to agree with your usb connection statement of the original BilletBox, it is rather strange that it is not included with the original.

that the reason why i would rather have the SXK DNA version of the BB.

in any case, the BB is bigger and heavier then the DotAio / Dotshell combo.

to be honest, i would like to see a re-engineered version of the BB, which more modern, including usb, and smaller and lighter. and without an additional locking mechanism for the pod which is not needed in the newer AIo systems.

2
YukarinValPulse X + Profile 1.5•

O yeah, they are small capacity. A shame.

Also while digging around Mechlyfe's site, apparently there's going to be a dual coil RBA for their Ratel XS. So that's another BB homage device with more than one option for a rebuildable.

1
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

I think the Ratel XS is pretty intruiging...but it's almost as big as my RSQ with an atty on top ;(

1
Vapebeee•

Nice review. I'm really close to pulling the trigger on this due to the price point. If I don't like it, I won't be too sad.

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Nice review.

Thanks

I'm really close to pulling the trigger on this due to the price point. If I don't like it, I won't be too sad.

For 30 bucks it's a really great device, as long as (loose) mtl is something you fancy.

1
datac1deEternal Noob•

Thanks for the in-depth review. You answered all of my questions/curiosities about the device. The vape provided by the RBA doesn't sound like it'd be a good fit for me. Hopefully, Rincoe will design a second one.

I'd like to get one of these AIO's, but for a single 21700 battery and an absolute flavor banger RBA designed for 40-60 watts. Is there any device out there like this?

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Thanks for the in-depth review. You answered all of my questions/curiosities about the device.

Thanks :)

The vape provided by the RBA doesn't sound like it'd be a good fit for me. Hopefully, Rincoe will design a second one.

I hope so, too!

I'd like to get one of these AIO's, but for a single 21700 battery and an absolute flavor banger RBA designed for 40-60 watts. Is there any device out there like this?

Only in my hand (this one's really sick though)

1
datac1deEternal Noob•

Only in my hand (this one's really sick though)

Which AIO is in your hand that you're talking about?

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

what a fucking typo, sorry ;(
I meant to write head

1