r/buildapc•
FineCard

PC shutdown mid game and won't boot until 10 minutes later. No power outages

Troubleshooting

So I had this Ryzen 3900X build since July and recently the power button no longer worked for a good 10 minutes after shutdown during gaming. Motherboard lights are still on though, Asus X570 Crosshair VIII Hero

Temps during gaming are 70c on both CPU and GPU, 35c on VRM. I have about 8 fans for airflow and don't use liquid cooling.

PSU is Seasonic 850W Gold Focus Plus

What caused the power buttons (mobo and case) to stop working? And is it a bad sign of CPU becoming faulty?

Posted Feb 1, 2020, 6:27 PM UTC

710
Bud_Johnson•

All your stand offs are on?

2
FineCardOP•

All your stand offs are on?

I have them between the motherboard and the case, is that correct?

1
Bud_Johnson•

You need all 8 or however any your mobo calls for. They help ground the mobo.

1
___ez_e___•

Have you tried jumping the power connect to eliminate the power button itself?

2
FineCardOP•

jumping the power connect

How do you do this?

1
___ez_e___•

On page 1-24, you want to cross the PWRBTN with a screwdriver and that is what would happen when you press the power button.

https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_HERO/E15379_ROG_CROSSHAIR_VIII_HERO_UM_WEB.pdf

I forgot you have q-code. Page 1-15 of manual. What does it say?

Also any debug lights on? (It’s right below Q-code)

2
FineCardOP•

Thanks. I'll keep that in mind. There was no post code and debug lights when the power button stopped working.

Do you think this issue could be related to "current capability" set over 100% for CPU, vddsoc, and DRAM?

1
___ez_e___•

Yeah if you tweaked bios it can definitely not boot up properly. If that is the case, you'll just want to reset the cmos. That'll restore the bios to original.

1
senorroboto•

Please provide your whole system specs

This probably has nothing to do with your CPU, most likely a PSU or motherboard issue. Some Seasonic Focus plus models had a recall on them for tripping their over-current protection too easily, might want to look into exactly what your model number is.

1
Gizmofan83•

I had that issue where I couldn't turn on my PC after power outage/surge. Had to switch off the power supply until the MB LED turned off. Was able to turn PC on afterwards. Cheapest thing to replace would be the PSU. So test with a different PS, then work from there.

1