Best way to protect paint?

HELP NEEDED

So i recently build an Eva-01 model kit, and it's really cool because you can even put the entry plug inside.

So I painted the entry plug and gave it a clear coat of vallejo's matt varnish and when it was all nice and dry I put the thing inside the Eva but when I pulled it out the paint was all scratched.

So here is when I need the help, how do I keep paint well protected when a piece has to be strongly handled?

Thanks in advance

Also here is the plug: https://m.imgur.com/a/wBR68wL

Posted Feb 3, 2020, 5:15 PM UTC

23
SigmaHyperion•

If the paint was scratched from putting it and and removing it, then it was because of friction on the sides of the 'outlet'.

No paint in the world is going to stand-up to being put into a hole that's too small. If a part is held into place with friction, then any increase in its size (like with a layer of paint) is going to make it larger and harder to fit into the hole.

Wherever the paint rubbed through needs to narrowed down just a tiny bit and then the paint re-applied.

It'll never be perfect though. Any piece with a tight enough fit to hold there is going to have to have enough friction that it'll wear through the paint pretty quickly.

3
czebas•

You can't really. Friction removes paint. That looks like a snug fit already and you are getting some rub in the picture. I'd make peace with it. You could try Vallejo game color, when it fully cures and you get complete coverage it is pretty tough.

3
magnetik713•

You can try mecha varnish. It's supposed to be more durable and made for gunpla.

2