Ultima Darts: Nerf Ultra compatible DIY projectiles
imgur.com/a/XTIH2uLPosted Feb 11, 2020, 7:35 AM UTC
Posted Feb 11, 2020, 7:35 AM UTC
This is fascinating. JSPB has a new dart-making kit that uses o-rings for heads. The same trick might work with Ultras.
Ooh. Do you have a link to where they showed the o-ring darts off? I'm poking around on their website and can't find anything.
Well, it was shown next to the Dart Burger but now it's gone. This kit appeared to contain a template for cutting darts from long foam tubes and a little device that squeezed the end of the cut dart allowing little o-rings to be rolled onto the tip. It had a fascinating video and now I'm mad at myself. Lately, I've referred to several items that disappeared suddenly and I'm sure it appears that I'm having hallucinations...maybe I am.
Looks like there is a JSPB dart cutter but for darts only. I might poke them and see whether they've gotten anything in the works, but for now... two different O-ring sizes ordered, time to experiment. If this works, we'd have old-school Mega darts that are somewhat cheap (< 15 cents) and don't require any molding.
The gimmick Ezek used was a cone-shaped piece with what looked like a barb on the end. I think he inserted it into the tube which is then crimped and the the o-rings rolled down onto it from the shaft of the cone-shaped piece. He's very easy to communicate with and if you inquire, he'll probably make one for you. (my description is probably faulty).
Why can i not stop looking at THICC
Jokes aside, well done
So we have 3rd party ultra darts now? Man, that really backfired for hasbro
Excellent! Any idea of the weight you end up with for each component?
Assuming they're similar in weight to other rubbers, 2-3g per cm of height for the head, 0.3-0.4g in the tail if foam backer rod is similar in weight to Nerf foam.
u/Messinger91 Using a bit of math it's probably possible to tweak the head height so they weigh about the same as stock Ultras with a better weight distribution.
Perhaps so.
I’m not sure about the weights, I’d need a pretty sensitive scale. They are definitely heavier than stock Ultras though.
Now we need to streamline the assembly process somehow, because that seems like a LOT of labor and man-hours for darts in a line that is only just now getting its proper flagship (the ULTRA-2 revolver).
I’ve been racking my cogitators and haven’t come up with any solutions yet.
No, this is where we'd be getting into custom tooling and machinery, and none of us has the cash-on-hand for that...as far as I know.
I wish.
I am now out of the prototype stage on these, they work wonderfully. The Ultra line of blasters so far is a questionable one, but the potential for greatness is there. Simple modification yields powerful results, however, the main limitation remains the expensive and lackluster ammunition. With the Two and more coming out reportedly soon, my goal was to fix this.
Reach back in Nerf history to the days of the +bow, SNAP, Nerfhaven, backer rod, and metal in darts. Many experiments were done to make darts with a suitably weighted head without the use of metal. I drew inspiration from these sources, namely the VANS and Gumdrop darts (a helpful suggestion by Kuryaka). Long story short, after several amusing failures, I successfully made Ultra-caliber darts using a very similar felt embedment technique to the Gumdrop style darts, using a liquid urethane cast as opposed to silicone. They are more consistent and far cheaper than genuine Ultras, and are also hilariously springy given that the head is more or less a soft bouncy ball.
Assembly video and files/materials:
https://m.youtube.com/watch?v=EI6TbnW9z_Y
How easy is it to disable the drm I dot think mine works beacuse it mine can shot regular darts isn't that what drm was for stop us from using regular darts have to use ultra if so then wouldn't these darts if I have skill to make them they would this work without taking it apart
It’s incredibly easy but you do need to open the thing to take the DRM out. I don’t think they would work with it still in.
Those darts are really cool! I’ve never seen anyone pour their own dart heads, nice work.