GS65 Stealth - My ThrottleStop Settings to Reduce Temperatures

Discussion

I know there's a lot of people in this subreddit complain about how their brand new GS65 Stealth still thermal throttles after undervolting with throttlestop. There are other options in the program that are pretty useful in lowering temps. Essentially, my goal is to 1) Lower temps (steady at <90C at all times) and 2) Maximize frame rates in game. Pretty straightforward.

I must preface that i'm NOT a throttlestop expert by any means, so I will use layman's terms in this post. I have done extended research on how to reduce temperatures using ThrottleStop, this is the culmination of my findings, if you will. After experimenting with settings, these are the best settings that yield the best results for MY purposes.

DISCLAIMER: My model is the GS65 Stealth 9SD with the 1660 ti and the newer i7-9750h. Every gpu and cpu runs at a different temp, so your mileage may vary with these settings. My usage includes games such as Battlefield V, Apex Legends, Fortnite, Dead by Daylight, Overwatch, and League of Legends. I do not do any CPU demanding specific tasks perse, so keep that in mind.

Dashboard: Enable speed shift - EPP, BD PROCHOT, SpeedStep, C1E. Uncheck everything else.

FIVR: CPU/cache: both -0.1523V, iGPU/System: both -0.05V. Adjust turbo ratio limits to 36 on all cores, this will reduce the maximum turbo boost speed to be 3.6GHz. Check 'Disable and Lock Turbo Power Limits' as well as 'OK - Save Voltages immediately. To me, this is the second most important component in lowering temps, right behind undervolting. Reducing the boost speed will of course reduce lower synthetic benchmark scores (cinebench, speedometer 2.0), however I highly doubt a typical user will see a notable difference in practical applications such as games and web browsing. As for content creation, it may prolong render and export durations, I cannot speak on that front.

TPL: Enable Speed Shift whenever PC is booted up by checking 'Speed Shift' and 'Enable Speed Shift when ThrottleStop starts.' Set the 'Max' to 36. This value should be the same as the turbo ratio limits, or else the cpu is going to boost to the lower value between the two. If you want to change one, change the other one too. You can (but I didn't) adjust the Turbo Boost Power Limits by lowering the long power max. This will lower the temperatures significantly in extended heavy usage, such as gaming. To me, this is a last resort option as it does create the power limit throttling problem. So I kept it as default.

Options: Check 'Start Minimized' and 'Minimize on Close'. Make sure the 'AC Profile' is set to the profile you are making these changes to. Make sure ThrottleStop starts automatically on boot. There are guides out there on how to do that.

That's pretty much it for my ThrottleStop settings; Again, i'm no computer expert by any means so don't come after me if these settings somehow fry your system (which I can assure you they won't). These settings are best for MY system with MY specific configuration. With these settings, I am able to average ~95 fps at 87C in Battlefield with mostly high settings and ~130 fps at 84C with mixed settings in Apex Legends. These two games work the laptop's components the most. I get 80C with other games.

Conclusion: After using this laptop for about a month and a half, I am pleased to say that I'm quite satisfied. Do not let the array of issues with this laptop appearing on this subreddit sway you away from purchasing this laptop, at least not for the 2019 model. I hope this posts help people out in optimizing their system; ThrottleStop is a fantastic tool and I definitely recommend it if you aren't using it already. If I made any inaccurate statements, feel free to correct me and I'll edit it ASAP. Also, feel free to ask me literally anything about the laptop. Treat this as an AMA. If there's only one thing to recommend GS65 users experiencing thermal issues, it is to experiment specifically with the turbo ratio limits in the FIVR window to tailor your use case. I hope this post will go a long way in helping those who are not PC savvy like me.

EDIT1: When undervolting, start at a conservative -0.1V, then test it out with stress tests, gaming, idling, web browsing... if the laptop doesn't BSOD, it means the cpu is stable with that undervolt setting. Then decrease the voltage level further by increments of 0.01V until it BSODs, stress testing and idling the laptop between each increment. After finding the max undervolt allowed by the cpu, you can fine tune it by adjusting the undervolt in the 0.001V range. Your results will probably differ from mine. The higher undervolt you can achieve, the bigger winner you are in the silicone lottery. Higher undervolt --> lower temps.

Posted Feb 12, 2020, 5:12 AM UTC · edited

3723
skijumptoes•

I think it's worth noting that people should't straight away undervolt by -150mv AND save changes immediately, not all CPU's react the same due to how they leave the production lines.

You want to fully test the settings before saving and setting TS to load on startup, maybe start at -125, test it, then try in -10mv increments after that.

I have a 9SD which was originally running at -156mv without issues and then some apps did start to BSOD, so it's now happy at -140.6mv. A benchmark or stress test isn't always enough to fully reveal issues, you need to run it real world for a good hour under load.

Also, if you're thinking of using MSI Afterburner to adjust GPU settings, make sure your CPU settings are stable beforehand, that way when you do see a BSOD you know what it's related to.

Other than that, great helpful post!

6
chrisaloOP•

Yeah you're right. I'll edit that in.

2
babananaba•

Where do i download throttlestop? The website looks a little bit sketchy.

Will i need to reboot throttlestop for the settings to take place or does it automatically start everytime i turn my laptop on

My laptop loses 1% of battery per 1 minute any tips ?

3
chrisaloOP•

Go to techpowerup's website as they are the official provider of the software. To have ThrottleStop open and run automatically, use task scheduler to have it open as soon as you log in, or as soon as the PC starts. Use this website for guidance, it's pretty straight forward: https://www.repairwin.com/how-to-start-throttlestop-at-windows-startup/

As for battery life, I've made a separate profile within ThrottleStop that is active when the laptop runs on battery power. For this profile, I have turbo completely disabled (check disable turbo in the dashboard), and the same undervolt settings as performance mode. I would also fiddle around with Window's built in power options in the control panel. Turn everything to maximize battery life. Have your laptop switch to 'Best Battery Life' by going to settings > system > battery > check 'Turn battery saver on automatically if my battery falls below:' > drag the slider to 100%, to allow battery saver at all times. It also helps by reducing screen brightness. Finally, make sure you don't have apps, programs, or processes using up high levels of cpu, ram. You can check this in the task manager. These are just the basics but pretty essential in extending battery life. Let me know how it goes.

3
babananaba•

Just did and i read that dragon centre interferes with throttlestop. How do i disable it or do i need to disable it?

1
chrisaloOP•

I'm not sure whether dragon center does in fact interfere with throttlestop, even after some research. However I uninstalled it anyways and installed Silent Option to adjust a custom fan curve as it offers a cleaner interface. Dragon center doesn't offer any valuable features so I think it is pretty safe to completely uninstall it. Just go to control panel and search for programs, then dragon center. You can go here to download Silent Option: https://forum-en.msi.com/index.php?topic=255972.0

These are my custom fan curves if you are interested: https://imgur.com/a/JiCRji8

4
babananaba•

Woah damn thanks

2
chrisaloOP•

A reliable method to ensure stable and safe temperature levels when experimenting with ThrottleStop settings is to monitor PROCHOT 95C box in the ThrottleStop dashboard. This indicates whether the package temp has reached 95C, which is considered the throttling point for this cpu model. You DON'T want to see this box checked after extended gaming sessions, so I would adjust settings > play some cpu/gpu intensive games for 30 mins - 1 hour > check back to see if the box remains unchecked. If so, the settings will yield stable performance. Adjust settings again and test again until you find the sweet spot.

3
Eskimostyle•

I did mostly the same and lock my boost till 3,4ghz and im always below 80°. I did not test heavy loads but on the tasks and games i play its good. I am wondering did u adjust ur fancurve and if so what does it look like?

2
chrisaloOP•

These are my custom fan curves in MSI Silent Option: https://imgur.com/a/JiCRji8 I know it is OK and safe to have the first gpu fan level at 0% because that is the default. GPU fan doesn't run on idle, when set to the auto preset.

2
Nighthaven-•

do you MSI people on 9750h undervolt with different core and cache ratio?

1
chrisaloOP•

No from what I have researched, people usually put the same undervolt on both the core and cache.

3
hazyPixelsGE75 8SG•

-0.1 volts is NOT a conservative starting point. My computer blue screens at this setting. All computers are different, even if they are identical models. Follow a procedure that finds the optimum setting for YOUR computer, DO NOT use someone else's settings.

1
chrisaloOP•

-0.1V works for all GS65 Stealth models from what I’ve seen. They either have the 8750h or 9750h which can both handle a 100mV undervolt.

0
S3TSUR4•

Can you please upload pictures of your settings?

1
chrisaloOP•

Yeah I thought about that in the middle of writing this. But here they are: https://imgur.com/a/LPza6qA

2
S3TSUR4•

Thank you!

2
UnluckyKid201•

Hey I wanted to ask you how do I know what settings to put for the other profiles or is it all the same? Also how do you switch between profiles? Sorry im new to throttlestop

1
chrisaloOP•

You absolutely don't have to use all four profiles but you can if you want. For me, with the default gaming profile, I was aiming for maximum performance without going over 90C, that will insure temps are in a safe range and i'm getting the maximum performance out of the machine. The battery profile is simple: I just turned off turbo boost and minimized clock speeds at all times by setting the speedshift value to 128. This will ensure maximum battery life without impeding on performance during light tasks such as web browsing, document editing, document viewing, etc. With this battery profile I am able to get 7.5 hours on 50% brightness. To switch profiles with ease, without even opening the throttlestop window, you can set hotkeys to each of the profiles in options>hotkeys. Let me know if you have any more questions. Happy to help!

1
ccyc87•

Hey, I stumbled upon this thread whilst fiddling with TS on my GS65 today.

I noticed in the picture that you set your Speedshift EPP value to 0.

Based on what I’ve read, 128 is balanced, with lower values bringing it closer to desktop power.

Did you experiment with other values? (E.g. 64, 128, etc.)

1
chrisaloOP•

Yeah. Since i’m plugged in, I dont mind the extra temp and power draw so I use 0 for it. 128 for the battery profile though.

1
Bujakaa92•

I really would like to know what Cinebench scores you are getting.

https://www.maxon.net/en-us/products/cinebench-r20-overview/

It puts CPU under pressure and will show out scores. Based on scores + monitoring heat I found out the best solution for myself. I will post them under here when I get home. But would love to hear what is your score also to compare.

1
chrisaloOP•

I was actually going to post some scores with corresponding ThrottleStop settings in this post but ultimately didn't because I didn't think they would bring practical meaning. My Cinebench R20 multi-core score is around 2800 and single core score is about 444. These are pretty normal scores with the settings in OP. This laptop's cooling system does not allow the cpu to run at 4.0+ ghz for extended time... it will just throttle back down to around 3.6ghz... so running Cinebench R20 WITHOUT Throttlestop, allowing the cpu to boost to whatever its thermal limitations allow, yields a relatively similar score as with a 3.6ghz turbo ratio limit, of 2800. If that makes sense. This is just another reason to limit the turbo ratio limit to around that 3.6 ghz mark, its a surefire way to prevent the cpu from even having a chance to thermal throttle.

1

Hello! I just picked up the exact same model and tried gaming on many different games. I was seeing cpu temps in the 90s and throttling for fortnite and cod warzone, and a little lower Temps on World of warcraft and Diablo. I took your advice and now my temps are awesome! Low 70s in wow and low 80s in cod warzone.

Was this a similar experience for you? Do you think the unit I got was defective? I'm still within my return window but since my Temps are under control using your advice, I think returning is pointless, plus I really love this laptop.

Thanks in advance!

1
chrisaloOP•

If after tuning, you get in the comfortable temp range, there is absolutely nothing to be worried about. I had to lower turbo boost ratio down to 3.3 ghz because I was still getting pretty high temps with 3.6 ghz. But yeah in warzone i get temps maxing out around 85C. What else are you worried about for your particular unit?

1

Its not so much worry its more of me wanting to be certain I didn't get stuck with a bad unit and then have my return window expire. After tuning im getting awesome temps, but before tuning I was in the 90s and throttling.

1
chrisaloOP•

Nah thats completely normal. What’s not normal is having lower temperatures right from the box lol.

1

Lol awesome thanks for the advice. How is it holding up for you? I always treat my computers and fines extremely well and I really want to get at least 5 years out of it before I upgrade to something new.

1
integrity-knight07•

Hey i have acer nitro 7 with i7 9750 h,gtx 1660 ti,8 gb ram.after undervolting my cinebench score decreased from 2000 to 1500 and in games like warzone,far cry 5 cpu and gpu temp are around 70-78 degree celsius. How can I increase benchmark score? (Without increasing the temp)

1
chrisaloOP•

Did you decrease turbo power limit? if so, you can increase it, then test.

1
[deleted]•

[deleted]

1
raprap07•

Hey thanks for this guide. Some questions, 1) what’s your setting in TPL? 2) If i already checked speedshift in the first window upon launching TS do I need to check the same under TPL(the one beside FIVR)? 3) In the core clocks in fivr should the clock speed per core be similar for every 2 cores or i can do a descending order from 1 to 6? Ive seen some guides using 41, 41, 40, 40, 39, 39 and some 41, 40, 39, 38, 37, 36 while others put it at 39, 39, 39, 39, 39, 39, so is there a difference in the way the amounts are imputed? 4) what does bd prochot do?

1
chrisaloOP•
  1. My settings in TPL are unchanged. 45 for long power max checked. 90 for short power max unchecked. However you can decrease the long power max to decrease temps. It will take a hit on performance though.
  2. yes, you need to check speedshift in TPL. You are good to go if you see the green SST icon next to speedshift in the dashboard.
  3. you can choose how you want the turbo ratios to be. I personally have it as 43, 41, 39, 37, 35, 33. So when all 6 cores are being used, clock speeds will not go past 3.3ghz. What matters most is the last number, that will dictate the cpu speed in games.
  4. not 100% but I think bd prochot just forces the cpu to throttle down below the base clock speed if thermal limitations are reached (95C for 9750h).
1
raprap07•

Thank you for answering! How do i check if i'm thermal throttling? Right now i'm using the msi afterburner but i think it shows different temps than in throttlestop cause sometimes it's showing around 80-90 in msi ab and when i alt-tab to throttlestop it shows around 75.

1
chrisaloOP•

Pay attention to the max column in throttlestop. If you have the 9750h, as soon as you see a value 95C or greater, it means the system is thermal throttling. Also if the PROCHOT 95C checkbox is checked, the system is thermal throttling.

1
[deleted]•

[deleted]

1