Vizio M55-D0 Dim Corner of Screen After Power Outage

[Problem]

Hello!

As title says, my Vizio now has a dim corner after a power outage. The picture is fine, but that part of the screen is just darker than the rest.

We did have difficulty turning the TV back on for the first time after the outage, but the unplug+hold power button fix got it on, and we haven't had problems turning it off and on since.

My thoughts are that it is either the power supply board or LED strip issue, but I am not sure and appreciate any help! If I open the TV, what should I look for? General safety tips are also appreciated; obviously it will be unplugged, but I read about capacitors holding charge (I don't own a voltmeter? but maybe I can borrow one??).

Posted Feb 14, 2020, 4:23 AM UTC

11
TeckFire•

It's an M series Vizio. They are made with full array panels, and it is common for their LEDs in a particular zone to go out. This can technically be fixed, but isn't easy, and parts may or may not be expensive. Usually, the power supply giving power to the rest of the TV and LEDs means it's fine, though not guaranteed without testing.

Safety wise, as long as you don't touch the high voltage, and leave the TV plugged in and powered on only while testing with a multimeter, (refer to a service manual if possible) then you should be safe. Wear tight rubber gloves the whole time if you're worried.

Multimeter's are around $20 on Amazon for a good one, and it will last you much longer than just this repair.

1