[Review] Dovpo Variant

Review

Welcome everyone! It's RDA o'clock; let's have a look at the Variant, which Dovpa was kind enough to send to me for the purpose of this review.

Dovpo Variant

just like my soul

Table of contents

  • Hard facts
  • Soft facts
  • Totally personal take
  • Pros/Cons
  • Summary
  • Disclaimer

Hard facts

this is a dual coil RDA

  • Measurements (without drip tip and 510) 24*25mm
  • Build deck kinda postless but even easier
  • Airflow is surprisingly restricted
  • Something noteworthy about the goodie bag? nope
  • designed by The Vapor Chronicles

Soft facts

deck and cap

The Variant's exterior is quite humble; it has a logo etched in, some markings on top, and that's it. Because both visual features are black as well, they don't pop in any way. The acrylic/resin 810 drip tip on top is also mostly black with a dash of grey. Overall, a really nice job IMHO. You can drop the Variant on about any mod and it'll look nice.

The tech side is also quite a simple design, which works just as well. I fucking adore the drip tip; often, 810s are fucking wide, the Variant's, however, fits my mouth way better. Adding the angle of the top cap I get a really nice chuff cap like experience.

The deck is probably the easiest build deck I've seen. You just drop the coil in, tighten the leads and call it a day. To get peak performance, I suggest to drop the coil as low as possible and slightly tilted to the outside.

Wicking, of course, is just as easy. Jam cotton into the coils and cut them flush with the deck, so the ends just drop onto it. Both squonking and dripping work really well. One of the nicest features of the Variant is the way one changes from squonking to non-squonking: the 510 pin has a cap, which can be secured, respectively loosened, with a flat head screwdriver. If you want to squonk, just loosen the cap; if you want to drip, secure the cap. Easy as pie, works with coils installed and it takes more time finding a screwdriver than actually changing modes. Really great idea.

once again, nice build ;(

Lastly, the airflow. Pretty much my only complaint. Honestly, I don't understand the set-up. We have a honeycomb situation, with two columns of four holes each. While I like the draw (pretty smooth), I don't get the positioning of the holes. The only holes that actually hit the coil directly are the ones in the top row as well as the second-to-top row. The lowest ones, in my experience, don't contribute to cooling the coil, they just offer more air and, when opened, the flavor intensity drops.

It's similar with the AFC. We have the option to close it down row by row one hole at a time. And we can start on the top, as well as on the bottom. While this allows quite a bit of flexibility, when I close the top rows, I run into heat issues quite fast, probably because the air doesn't hit the coil directly.

When vaping while having the bottom row closed, however, I also get a hot top cap, but only after extensively chain vaping.

Flavorwise, I can't complain. I wanted to see whether the Variant can be comfortably used with a single battery mod (because I got it in a kit with the Topside Lite), and so I went with 50 to 60 Watts for the most part and got a quite poppy experience.

So, overall, I think the Variant is a quite nice RDA, which is very suitable for beginners. I like that I can go from squonking to dripping and vice versa in a heartbeat and the performance is way above average. I just wished that the airflow design would be a bit different, for example, true bottom airflow instead of the indirect two bottom rows.

NB: yes, this pretty much looks like the Drop, with a different approach for mode switching and an updated AFC; while I like the latter, it sadly made having four holes on the top impossible (the inner part of the AFC would have needed to be shaped differently, but there just isn't enough space). I never used the Drop so I can't comment on differences in terms of performance.

Totally personal take

Simple conclusion for a simple RDA: it just works pretty well. While I didn't plan for it, it ended up as my daily banger in the past two weeks, and I have to say I enjoyed the Variant. Dripping is as comfortable as squonking, building is a breeze, and the AFC is cute; I just would have liked a different airflow set-up for some true flexibility; for best performance, I feel being shoehorned into the bottom row closed or otherwise the top cap gets too hot.

Pros/Cons

ProsCons
easy to use
smooth draw
flavor is pretty goodairflow and AFC could have been designed a tad better

Summary

RDAAiriness: sucking on a straw to barn doorSmoothness: fasten your seat belts to butterMy thoughts summarized with an ASCIIStar reviewFinal thoughts
Dovpo Variant■■■■□■■■■□(ᵔᴥᵔ)★★★★☆very well suited for beginners; easy to use, nice as a dripper and squonker and it's easy to change from one mod to the other; airflow/AFC could have been done better IMHO

Info & Disclaimer

  • The Dovpo Variant was sent to me for the purpose of this review by Dovpo.
  • All of my reviews along with my recommendations can be found in these reddit posts: RDAs and everything else. If you enjoy filtering and sorting, I also packed my summary tables into a google spreadsheet.
  • I'm a lazy fuck. And English isn't my first language, so please bear with me.
  • A proper disclaimer can be found here.

Posted Feb 14, 2020, 7:41 PM UTC

13
Badazdwww.badazdcoils.com•

Sorry, breezed through this one, all I could think was “Drop knock off.”

Nice thing is that the airflow does seem slightly more focused towards the center when compared to the predecessor. I know your feels about the airflow closing off from the top, you’re a fan of that direct airflow too right?

Thanks again for reviewing all this stuff!!

2
IPDNOP⏍⊂(•ヮ•)ҩҩѠѠѠѠ•

Sorry, breezed through this one, all I could think was “Drop knock off.”

yepp, that's undeniable :)

Nice thing is that the airflow does seem slightly more focused towards the center when compared to the predecessor. I know your feels about the airflow closing off from the top, you’re a fan of that direct airflow too right?

yeah, I quite like it, especially since the manage to still make it smooth

Thanks again for reviewing all this stuff!!

we all contribute in our own ways to this community :)

1
schmuber•

all I could think was “Drop knock off.”

Same designer, different manufacturer… so technically it's a Drop 2.0.

1