PSA: Don't try to set your SimpliCam to 1080p
I was tinkering and set my SimpliCam to 1080p. Better quality, why not right? As soon as I saved the settings I started getting streaming errors and could no longer access the camera feed. Still didn't work after reverting back to 720p and I had to hard-reset the camera and re-add.
I checked in with support about this, and apparently it became an option once the doorbell cams were released, but the SimpliCams only support 720p max.
Anyhow, hope that saves someone the time it took me to get to the bottom of it :)
Posted Feb 14, 2020, 8:43 PM UTC
[deleted]
Hmm. My doorbell does allow me to set it to 1080p and it seems to work ok. According to their support it’s the indoor cameras that are 720p only.
Their support did have insight into the network bandwidth and the signal strength to the cameras when I called in. May be worth calling and seeing if they can give you any more insight.