r/espresso•
Tsunimo

How to deal with an unreliable scale

I am using a Rancilio Silvia without PID and a Knock Aergrind, though that's not the issue. I am new to making espresso, this is not a new issue

​

Whenever I pull shots, I use a small "herb" scale that fits perfectly on the tray, with a cup on top, as in the picture.

https://preview.redd.it/5gagui1xwhj41.jpg?width=3024&format=pjpg&auto=webp&s=1c200179876251cef3c63afa1b42b4264f2f6dd9

​

However, when I start the pump, the scale jumps from 0 to around -0.5g. But if after the shot is done, I move the scale to the counter, re-zero with an empty cup and reweigh, its anywhere from 10-20% heavier.

​

Last time I stopped at about 40g, and it reweighed at a little over 46g. Is there a way to stop this? Do I just have to try and account for massive scale errors with every shot? I've been trying to dial in these beans for a while now, and don't want them to be gone before I even get to enjoy them.

EDIT: I guess i forgot to explicitly state it, but I dont think its a scale issue, more to do with the vibrations of the machine messing up the reading

Posted Feb 27, 2020, 4:47 PM UTC · edited

08
silverslantExpobar Office Pulser•

Honestly decent scales are cheap, just buy a more accurate scale

9
TsunimoOP•

I mean its about a $12 scale. It weighs to the 0.01g, and otherwise doesnt seem to have an issue. I feel like it has more to do with the vibrations of the machine messing with it.

-1
Guy_Perish•

You can put a rag , folded, under the scale to absorb the vibrations.

1
alsignssayno•

If you're in the US, take 5 (nice) nickels, get new nickels from a bank if you want, and weigh them. Should be 25g. Now that you have a baseline, remeasure them 10 times to see if your scale is consistent. If it is, scale is fine. If not, you need a new scale.

If you get a new scale, grab an aws 2kg scale. Accurate to 0.1g and extremely reliable.

1
MtnRubi•

Bet way to fix a crappy scale is to replace it with a not crappy scale.

7
xfloggingkylex•

What does the bottom of the scale look like? It needs all contact points to be stable so the fix could be as simple as a thin piece of, say plastic cutting board under the scale so it isn't sitting on the grates and possibly not distributing its weight accurately.

5
[deleted]•

[deleted]

2
htrae2014•

The other cup you are re-taring with is probably not the exact same weight as the one you pulled your shot in. I have a set of cups and they all vary in weight slightly.

2
flogthepony•

Yeah let me do some remote healing of your scale right now *Bzzzzzzzzz* That did it, it’s all better now.

1