r/Vaping•
IPDN

[how-to] Surviving the Vapocalypse

Welcome, everyone!

So, the Vapocalypse is looming and it seems like there's nothing to stop it. Since I was asked how to best prepare (aka what wombo combo would stand the test of time) I started writing a quite extensive answer. And I thought maybe some more people would benefit from it, so here we go.

Vapocalypse - what to buy

  • juice
  • atty
  • mod
  • supplies

Just a warning: this is all my personal view, and in order to not let this be an insane wall of text, I'm not going too much into shit I personally wouldn't bother with assuming I was affected by the Vapocalypse. I'm going to throw a lot of subjective shit around, and may not fully explain the why or back it up with sources (other than my experience, of course). If you disagree, please do so, such that other people are presented with more options. When I think someone makes a good point, and I find the time, I'll include additional info/things to consider.

Also, if you have any questions, just ask and I'll try to give a more detailed reasoning compared to what's contained in this post.

Also, this isn't a tutorial. If you want to learn about DIYing or mechs or whatever, there are a lot of great sources to be found. No need for a scrub like me parroting what others do better.

This is intended as a signpost post, which covers the, in my opinion, most basic things to know and the best things to buy.

Juice

Yeah, no way other than DIY probably. There's no need to stock up on a lot of PG or VG, since you can just buy it. However, I'd advise stocking up on nicotine. No easier way to fuck over vapers than making nicotine an even more controlled substance, that you can only buy with a license.

How much to buy? Well, that depends. If you are vaping X ml with Y mg on average per day, you'll need XY*365*(years you want to vape no matter what)mg.

So, for example: 15ml of 3mg juice. If you buy 400ml with 50mg/ml you'll get 20.000mg nicotine, which will last just a bit more than 1 year.

Your PG and VG can be stored pretty much anywhere. I don't give a shit, and nothing bad has happened so far. The nicotine, however, should be put in the freezer. Before you do that, however, divide it into smaller batches. For example, when I mix, I mix 500ml to 1L, so I'd prepare according to that.

No need to refreeze, nicotine should be good for a couple of months (should), however, I wouldn't dare to risk a lot of it at once.

Flavor is a lot harder to asses. I got no clue about its shelf life. Normally, it's labeled with an expiry date up to one year later, but that seems too short for me. Also, it's just food flavoring, so you should be able to buy (mono flavors at least) without any issues; I don't know about the availability of Koolada or some other WS stuff, though.

If you are into it, picking up some menthol crystals might be a good idea, I don't think they can degrade (but please, don't quote me on that).

If you buy food flavoring, be sure to pick something that's solved in PG or in alcohol (let the juice steep for a bit with the bottle opened, so the alcohol can evaporate).

Also, when buying food flavorings, be sure to not use ones that are (fat) oils. Having said that, essential oils are a completely different beast and, AFAIK, are useable for vaping. Again, please don't quote me on that and when in doubt, stay away.

Other than that, you don't need much. I suggest buying a scale with two decimal digits and a couple of syringes. If you want to, you can mass buy bottles (I use Fakey Gorillaz because there are very wide at the top, so filling in the base is easy as fuck), but you don't have to necessarily, because you can always transition to glass bottles. However, beware that you may need bottles with that dropper thingy (whatever the fuck that's called).

mech or chip? sub-ohm or rebuildable? RDA or RTA?

Before I head to the atty and mod sections, I need to explain how I arrived at my conclusions.

We stay away from sub-ohm tanks and pods. Vapocalypse = no coils = no bueno.

We also stay away from anything that has a chip in it, that is we go mech. The soldering might be bad, the contacts might corrode, the mod might get whelmed in liquid or whatever. We want something that came to stay, and, maybe unfortunately for a lot of peoples, there is no way around mechs.

disclaimer: use mechs at your own risk and educate yourself before doing so (battery safety, Ohm's law, Mooch's battery ratings).

So, the most important question: RDA or RTA?

I'm, of fucking course, biased as fuck: RDAs, hands down. Tanks come with glasses. You drop them = they brake = no bueno. If you use plastic tanks, liquid might crack them. An RDA however, basically can't break in more ways than an RTA.

So, this leaves you with the choice of tubes or squonking. Dripping for me is way too tedious, so squonk mod it is. Also, in my opinion mech squonks are way easier to clean and do maintenance for. Changing/cleaining the strips is way easier than doing the same with a button. Lastly, depending on the button, once it breaks it might not be repairable/replaceable.

However, there is one downside to most mech squonks: one battery = one coil.

If you need dual coils, you might need to go with a stacked tube, because using a dual coil atty on a single coil mech is no fun in my opinion (or potentially dangerous, or both). But then again, a series build is a totally different beast to what a normal dual coil build is.

If you want dual coil squonking, you might need to hunt a parallel dual battery mech squonker (not many released) or build one yourself.

atty

For me, single battery mechs work the best when used with coils with Ohm out between 0.2 and 0.5 Ohms. This narrows the range of potential attys quite a bit

  • no true MTL (possible, but I can't help you with such a high resistance builds, because I never tried them) and
  • no airy as fuck RDAs because we'd need to build way lower than recommended (bye bye .blank)

So, my suggestions are based on:

  • mechability
  • bangness
  • availability

​

airflowRDAcoil
□□□□□Vapefly Holic, FeV BF-124ga Kanthal, 2.5mm, 6 wraps
■□□□□FLVRSFQ30, 3mm, 5/6 wraps
■■□□□BDVape PureSFQ30, 3mm, 5/6 wraps
■■■□□Phenom, Hussar LegacyNi80 tricore clapton, 28ga, 3mm, 4/5 wraps; or SFQ28, 3.5mm, 5/6 wraps
■■■■□Hadaly, HadeonNi80 tricore clapton, 28ga, 3mm, 4/5 wraps; or SFQ28, 3.5mm, 5/6 wraps
■■■■■Wasp NanoNi80 quadcore clapton, 28ga, 3mm, 4/5 wrap

If you are interested in my respective reviews, you can find them here.

Two things: of course, you can use other RDAs as well, but

  • not each works well for me on mechs (Venna for example, or the Nova) because I never found a balanced coil;
  • some are too hard to get (Shogun or Jenna).

When buying an atty, if you want to be sure it lasts, go for stainless steel or POM. PC cracks way too easily.

The suggested coils are my standard ones which work beautifully on mechs, but of course, there is a shit ton more you can use.

mod

If you want something fancy, you don't need my help. Also, this post is about prepping, so we are in for something rather cheap. There are four choices IMHO:

​

modproscons
Dovpo Topside SQtop filling; supposedly great qualityproprietary 510, proprietary bottle, rather expensive
Huge Squeezercheap as fuckproprietary bottle, it' cheap and it shows
Snowcap Mods Handypretty cheap, very well built, easy to maintainonly one color choice
build your owncheap as fuck, pretty cheap, very well built, easy to maintain

please note that these are all 21700 mods

Reviews for the Hugo Squeezer and the Snowcap Mods Handy can be found here.

The Squeezer's bottles use a non-standard sized tube, so you can't easily buy spares. Also, I didn't disassemble it, so I'm not sure you can replace the 510. Lastly, while build quality isn't shit tier, overall it leaves a rather cheap impression (the lock doesn't work flawlessly; the painting being wonky; ...).

As sexy as the top filling is, once something breaks, the Topside SQ is probably done, and we are in for the long run, so I'm not sure it's the best way to go, even if you have the money to spare.

As such, if you want to really prep out, the Handy is the way to go IMHO. Very cheap for the quality you get and you can buy spare 510s and bottles as well as copper strips (or sheets) and will be set for the rest of your life.

Once, u/supercubansandwich showed me a video of him kicking the Handy around a parking lot...it got some bruises but that was it. Built to last, very small and light-weight.

Of course, you can also build your own; here is what you need:

  • a 510
  • a bottle
  • copper strips (no need for silver plated, they hit the same; also, you can buy sheets and cut them to size).

If you need a tutorial, check out the one by Geekay Vapes on youtube; it's what I used and it left me without any questions.

Now, you only need a box. The easiest ways are to either buy one or print one.

I personally can vouch for the wooden boxes by Berkshire Box Mods. I bought one and it's unbelievable cheap for the quality you get; aslo, they are super nice. Beware, though, that you might need to oil it. Also, only 18650 and 20700 versions available.

If you want to go the printing route, you can either get the files necessary from modmaker (dinky cuboid), or Thingiverse. In case of thingieverse, I have a Chonky (21700) as well as a Fuse Box (18650) and both are really well done.

I can't help you with printing services, but there should be plenty available. Personally, I prefer Nylon (sturdy, lightweight and out of all the regular options the one with the highest heat resistance). Get a white one and dye it to taste.

supplies

What else to buy?

  • Cotton: get some Japanese cotton (I use Muji and Puff) and call it a day. No difference in performance when compared to vaper's cotton, but cheap as shit.
  • Drip tips: buy a handful, you'll never know.
  • Top caps: buy a handful, you'll never know.
  • You don't need O-rings or screws, since they can be bought rather easily.
  • tools: maybe a couple of ceramic tweezers, a couple of coiling rods, stainless steel brushes
  • batteries: hopefully, these stay available for purchase when the vape business goes to shit
  • Wire: either get some of the spools I recommended above, or just some simple round wire (Ni80, 28ga).; the difference between claptons and parallel coils isn't huge, claptons are just more convenient (hint: when using parallel, twist the leads; then the coil is easier to install). Personally, I'd buy both (that is the spools of special wire and a couple of hundred meters of round wire, just to be sure).

If you want to experiment, also buy Ni80 26ga and Ni80 30ga and some SS316Ls (also 26ga, 28ga, 30ga). Also, in theory you can make claptons and SFQs yourself, but be aware that it takes a lot of time, dedication and wire to get good results.

About the amount of wire needed: one coil is roughly 10cm, or 4 inches. If you are careful when cleaning (use them stainless steel brushes!), you can use one for months.

So, that's pretty much it.

As I said at the beginning, this post should serve as a starting point. If you have any questions (why some attys are omitted, for example) just ask. I really didn't want to overload this post; I think it's better to provide details in the comments instead of the main body so it's not a daunting wall of text.

Posted Mar 5, 2020, 9:06 PM UTC

5826
Kingnewb_311•

Pg/Vg - Will always be available in the states.

Flavorings - Will always be available in the states.

Cotton - Will always be available in the states.

Batteries - Will always be available in the states.

Wire - Will always be available in the states.

Pretty much everything listed will be available, regardless of the laws passed, simply because they are used for so much more than vaping.

Your current mods are all based off the ingenuity of the first generation of vapers who were tired of using those cheap 808D type devices. A lot of us built devices out of anything and everything in order to overcome the restrictions first gen devices had (i.e. airflow, liquid capacity, battery capacity, yada yada yada). The only things this will affect are: Regulated mods, being able to buy store bought liquid, and the ability to get nicotine.

Nicotine is the one thing that COULD be regulated into oblivion.

8
syrik420•

Nicotine looks to be at the least taxed to oblivion. I know I can make my own mods, I already make my own juice, and I have more than enough atty’s to last the rest of my life (going to grab a couple extra RDAs to be safe), but I definitely need to stock up on nicotine. Everyone reading this needs to stock up on nicotine.

3
MotherChuckinOhms•

I think batteries should be available pretty long because some flashflights use 18650,20700,21700

6
lestermagnetoventuraeque hiemis Ω🐈**8645**•

yeah, batteries and cotton and pg/vg/ flavor concentrates should be fine.

If you need to allocute your resources in certain areas, absolutely follow what IPDN is saying regarding the rest without question.

7
MotherChuckinOhms•

Well i cant stock up yet because im broke for now and there is nothing about vape bans here in finland yet (except these old bans)

4
lestermagnetoventuraeque hiemis Ω🐈**8645**•

right, his post here is mostly aimed to stateside users here facing the upcoming 5.12.20 step on our throats deeming regulations.

6
MotherChuckinOhms•

Yeah well it is useful for me too when vapocalypse hits here

2
IPDNOP•

If I'm not mistaken, flashlights use lower amp batteries

As such, I'd be afraid that shops stop carrying something with 20+ amps

-1
Electricstorm13•

You can always buy off the internet or directly from a manufacturer for batterys

1
blimpsinspace•

MTL vapers concerned about RTA durability can use something like the Vandy Vape BSKR v1.5 - it comes with a metal tank to use in place of the glass, so you can drop it as much as you like and it'll be fine. I've also dropped my Dovpo Blotto a bunch of times already with the ultem bubble tank on there and it's held up great, but backup tanks can be had for a few bucks each so no big deal to order a bunch if you like that particular tank.

4
GettinHungry67•

is there any chance that there will be some sites based in another country that will still ship to the US?

3
soilstack🇬🇧 r/VapingUK 🇬🇧•

Great Post I think this with today’s climate its definitely needed . 🇬🇧👍

2
lestermagnetoventuraeque hiemis Ω🐈**8645**•

yeah, this is a great post. VERY thankful to IPDN for composing it.

0
IPDNOP•

thanks :)

0
hoonposting•

nic gods willing we'll be able to adapt and ride out the vapocalypse, but if lawmakers REALLY want to push vapers back to smoking, the increased deaths from lung cancer will be their responsibility in the history books. thanks for the info, long live the naysh

2
lestermagnetoMODventuraeque hiemis Ω🐈**8645**•

FANTASTIC post my friend u/IPDN, I am gonna sticky this.....

Pay attention people. This is a well composed, thoughtful post, especially considering the user is NOT based in the US and facing the issues those in the states are. Please show him some love.

1
IPDNOP•

FANTASTIC post my friend u/IPDN, I am gonna sticky this.....

thank you for the kind words :)

Pay attention people. This is a well composed, thoughtful post, especially considering the user is NOT based in the US and facing the issues those in the states are. Please show him some love.

gotta help whereever I can :)

1
lestermagnetoventuraeque hiemis Ω🐈**8645**•

gotta help whereever I can :)

you DO sir, and it is MUCH appreciated.

2
zaz-🎩🐓•

What ratio (pg/vg and concentration) of nicotine is best for adding to premade 0mg Juice? 3% or lower is my desired nicotine lvl and most, if not all the premade juice is 70/30.

1
kevmo911•

alltheflavors.com has a built-in calculator for every recipe (thousands?). pick one and play around with the numbers and you'll find what you're looking for.

1
zaz-🎩🐓•

I’m not looking into making my own juice yet. It’s just easier to find juice online that’s 0% nicotine so I figured that I would just add my own to it. So I’m just wondering what concentration of nicotine would work best for .15%-.3% nic and the juices I get are mainly 70VG/30PG so do I want vg or pg base nic for sub ohm.

2
kevmo911•

PG is a lot easier to work with. VG is much thicker. And the higher the nic concentration to begin with, the less you'll end up diluting your premade juice. Oh, and 3mg nicotine is 0.3%, not 3%.

I understand you're not making your own juice. I still recommend using a calc at ATV to see exactly what weights and volumes you're dealing with.

3
zaz-🎩🐓•

Typo, sorry. I promise that I meant .3% and .15% (I will fix my typos) I would definitely use the ATV calc and measure everything correctly. I appreciate your help though and now HST you explained it, it makes total sense to me the higher the better since it is pre mixed a bottle of .3 would be a slightly different mixture than 0. Thanks a lot for you help! I really appreciate it.

1
Ernie_is_deadBonza is love, Bonza is life•

Or order your stuff in Europe in the future. No Vapocalypse there.

1
FirstbronUnicron•

For tiny MTL setups, An 18350 tube with a rugged atty (BSKR v1.5 w/metal tube, Galaxies RDTA) could work.

1