r/lego•
Fairgrim

Rebuild of 31104 with regular size wheels.

MOC
Rebuild of 31104 with regular size wheels.

Posted Mar 8, 2020, 5:02 PM UTC

195
FairgrimOP•

I’ve been working on some food truck ideas for my city area and the 3 in 1 Monster Truck looked like a perfect fit if the wheels were cut down to size. While removing the oversized suspension was fairly easy, the refit was a little harder than I hoped on the rear axle and I still have some strength issues until I find some extra parts.

3
LadyofLA•

I like this sooooo much better than Lego's silly version!

I have the set still in its box in my closet. Any tips for the modification? I have lots and lots of wheels of various sizes but not sure what else I'd need that I might be lacking.

1
FairgrimOP•

I used the wheels already in the set from under the picnic table and fitting them under the front only took a few axle parts and a pair of 2 x 4 plates to adjust the ride height. When you remove the back stuff the floor lost all its integrity and I still need to find some 1 x 10 plates and 1 x 4 bricks to hold everything together better.

2
DTURPLESMITH•

Good improvement! I will need to try this

1