Newbie providing newbie pointers
Posting this with the hopes that anyone else jumping into this venture doesn't make the same mistakes I've made.
I'm not a pro at this by any stretch and I've only been at this a couple months, so take what I say here with a grain of salt. These are just things I've learned in that time that might help you, the newbie here looking for answers, save some time and possibly money in the long run. Chances are someone's going to jump in the comments and add or correct something here and I hope they do as I still have a lot to learn myself.
Don't walk into this with the mindset that I had: "How hard could this be?" Your candles will, in fact, show you how hard it can be. There are a lot of variables to consider and I'll cover those below. But we jumped into this as a side-venture to make a little extra money on the side and I've wasted so much money...I don't even want to think about it...
Start small.
Small jars. Small orders. You name it. It's easy to look at prices and say, "Well, they're not THAT expensive..." and buy in bulk, but now I'm sitting on about 80 black tumblers from CS that I'm not going to use now, if at all. That includes the lids, the hundreds of wicks (we kept buying the 100-count packs of various wicks to test....stupid on my part...) and the 30 remaining pounds of 464 that I'm not going to use - we switched over to 6006.Find a wax, wick and small jar and have a few test runs until you can get repeatable results that you are happy with. Then, certain things will start to make sense to you and you can start experimenting with different-sized jars, wicks, etc., but start small.
Research - DO IT.
I can't stress this enough. Ask questions, make phone calls if you have to. CandleScience is very active on Twitter with answering questions and whatnot.I was running into a lot of issues with our previously-mentioned tumblers and finally turned to this sub for help just a few days ago. I have an analytical mind and love troubleshooting, but I was stumped. u/Holiday_Hamster replied and brought up something that I wasn't even paying attention to: heat retention. No matter what wick I used, I couldn't get the right burn. Those tumblers are very thin compared to jelly jars or mason-style jars and they simply weren't working out with the 6006 wax - which has a higher melt point than other waxes.
Less is more.
You'll see on just about every vendor's page where they list a "max fragrance load" for the waxes they offer. While that's good info to have, don't think, "I'm just going to load this 6006 with the max 10% and be good." And, again, thanks to u/Holiday_Hamster for backing me off that ledge.Long story short, I now have a 8 oz. jelly jar, Eco 2 wick, 6006 wax with a 7% fragrance load that throws 100% better than a 10% load did in the tumblers with an Eco 8 or Eco 10 wick - and the jelly jars cost less than half as much as the tumblers, so that's a bonus.Think of your wick as a garden hose and the flame is the pump: too much of any one additive (colorant, fragrance, etc.) can clog your hose and it won't work right.
Be patient.
For wick testing, I let the candle sit for a minimum of 24 hours before lighting. This entire process takes time. Also, keep in mind that it will burn much differently as the wax burns down, so be careful "wicking up" (going with bigger wick sizes) as your results will vary as you get halfway through the candle or lower in the jar (because of the aforementioned heat retention). No matter what size candle you are looking to make, if you're looking to actually sell these candles you're making, you owe it to yourself and your customers to do full burn tests. Depending on the size, this could take hours or even days, but you'll be glad you did it. You may discover issues that you didn't think of before.
I look forward to seeing your creations!
---Edit: formatting.
Posted Mar 13, 2020, 12:20 PM UTC · edited
Good points for everyone to keep in mind. Being patient is key, especially with getting the exact right wick and exact right fragrance load you're going for. Some of the aesthetics can be fixed over time (spotting, imperfect tops, cracking, frosting), but the guts of the candle have to "work" right.