30-30, weird flowing, cratered primers and bulging cases?

30-30, weird flowing, cratered primers and bulging cases?

Posted Mar 30, 2020, 7:28 PM UTC

147
UseTwoHamsOP•

Got a 1984 Marlin 30AS from my grandpa a few years before he died. In shooting it I’ve noticed that it seems to run really high pressure for some reason, craters primers, and develops these weird stretch marks towards the base of the case. The bulge is enough for me to feel with my fingers. The question is, is this barrel dangerously out of tolerance and are these cases ruined from a reloading standpoint? I can put up some more photos of the bore if need be.

3
MrSticky_•

I have a rifle with a loose chamber, it bulges I think more than those cases you posted and I'm not too worried. I keep a close eye when I go to reload those cases and I keep track of how many times I've fired them. But as long as there's no case head separation going on or any sort of out of the ordinary bulging (comparatively) then they get loaded.

Granted, those cases are much more expensive than .30-30, so it might not be worth the risk to you. But loading those cases at least once more wouldn't make me lose any sleep.

And are you sure those are stretch marks and not light scratches?

2
UseTwoHamsOP•

Thanks for the reply! They may indeed be scratches since my chamber does have similar marks around the base that I can see looking through the ejection port. I was just worried since those plus bulging in the area made it look like stretching to me. Does your rifle also crater primers?

2
MrSticky_•

Ohhh right, the cratered primers. Can't say that mine does that. How does the bolt face look? When the firing pin is all the way forward does it seal the hole completely? If there's a gap the primers might flow back into there, but I think that's more common on old military rifles from back when they used corrosive ammo, and it would eat away at the bolt face. Not sure if that would really be described as cratered anyways..

What kind of ammo have you been firing?

1
UseTwoHamsOP•

Been using Herters, Federal, S&B and PPU. I’ll check out the bolt.

1
tacdriver22mk2•

Yeah need to check the headspace/ take it to a legit gunsmith something is amiss

1
UseTwoHamsOP•

As soon as I can leave my house again I will.

1