Primer pockets

So you're loading up a bunch of your favorite once-ish fired random brass and wow, that primer went in a bit too easy. Is there a better way to know the pocket is lame before you prime it? In this situation do you:

  1. Discard the primed brass?

  2. Pop the primer using a rifle and then discard the brass?

  3. Push the live primer back out using decapping tool and discard the brass?

  4. Mark the brass in some way to remember to exclude it next time and keep loading?

Is there some better 5th option?

Posted Apr 23, 2020, 7:43 PM UTC

616
Trippn21•
  1. Send it
6
clearlyguy26•

Really depends how loose but when in doubt I toss the case.

4
SlantedBlueOP•

With the primer still in it?

2
panfriedmarmot•

Yeah, its not gonna do much if it pops especially contained in a case with no bullet. If you're really concerned you could pop it in a rifle like you said or just put it in some water for a while and ruin the primer.

6
101stjetmech•

I'm with you, just chuck it. What clued me in was the number of times the land fill outside Ft. Campbell had stuff like CS grenades and 40mm m203 rounds go off as trash was being pushed around with a dozen or being compacted. No one ever injured, just pissed off!

But definitely crush the case. Just squeeze the center of the body with pliers and its unusable.

-1
101stjetmech•

A downvote, eh? Are you one of the dumbass GIs stealing USG ordnance then throwing it in the dump? Had one stealing grenades. Stored them under his house until one went off, setting off the rest. Lifted the house off the foundation. He's probably still in Leavenworth.

0
clearlyguy26•

I usually decap them

2
A_Plinkers_Damn9mm, 7.62x38, .357 - Lee Challenger/Lee Classic Turret•

When in doubt... brass is cheap. You can just carefully deprime the case and toss the brass. (I'd deform it somehow to make it clear it's fucked, mind. I have a set of pliers on my reloading bench for just that purpose.)

Alternately, you just just drop some oil or water into the brass to deactivate the primer and then toss the brass.

3
SlantedBlueOP•

Yeah, and primers are cheap, too. I just wish we had a way to know in advance a primer pocket was loose before seating the primer. Oh well.

1
A_Plinkers_Damn9mm, 7.62x38, .357 - Lee Challenger/Lee Classic Turret•

I mean... I've reused multiple primers after decapping them.

Just sayin', is all.

6
Sasquatch1985•

I've decapped plenty of live primers too.

4
Fanofde4ever•

They make go/no-go gauges for primer pockets. https://ballistictools.com/store/small-and-large-primer-pocket-gauges That's a set for large, and small primer pockets, but you can buy them individually too if you only use one or the other.

3
SlantedBlueOP•

Oh that's cool. That's the kind of thing I was secretly hoping for.

1
jebova23019mm, 10mm, .223/5.56, 450bm, 50ae•

I just mark it with a sharpie, send it, and if I pick up that piece of brass, it goes in the scrap bucket.

2
ha1fway•

This is my go to. I set em aside and then load up a batch last firing and toss it after I shoot it. My Savage LRP is really hard on 6.5 creedmoor brass. Not sure if it’s the right throat or something else but I can’t load 140’s over 2700 FPS or I start getting extractor swipes and blown primers if it’s suppressed.

2
mactroneng•

Decapped the live primer and reuse it (if you don't warp it during decapping - I've done that to a few and just tossed them)

1